Drench Showers

Speakman Lifesaver® emergency showers are designed to provide superior protection when emergencies arise. All Lifesaver showers feature an impeller action yellow showerhead with integral flow control. The SE-227-SS model features a horizontal overhead supply with stay open ball valve, allowing hands free operation once the shower has been activated. The high visibility stainless steel pull rod, makes finding the SE-227-SS easy in an emergency. The SE-227-SS meets ANSI Z385.1 compliance.

Powder coated stainless steel pipework and rose ensures resistance to corrosive and flammable materials while also being easy to clean. High-performance quarter-turn ball valve made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation. Includes a separate 12 x 10-in (305 x 254-mm) universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording test and service history. Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements. Ideal for ...

Haws® Axion MSR™ ABS Plastic Drench Shower Head, 20 GPM, SP829 Model SP829 AXION®MSR hydrodynamic designed green ABS plastic showerhead with 20 gpm (75.7 L) flow control and 1" NPT inlet.

For cold climates with a minimum ambient operating temperature of -4°F (-20°C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength. Suitable for both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Includes a universal safety shower sign for enhanced visibility, as well as an inspection record tag for recording service and test history. Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements. This freeze protected and insulated drench shower is intended for use where ...

Haws® Drench Hose Assembly Model 8901RFK body spray features a ABS plastic head, stay-open squeeze lever valve, 8 foot (243.8 cm) hose and installation kit. Kit includes clamp hook-up, tee clips and fitting for retrofit installation on most combination shower and eyewash units. Supply: 1/2" NPT.In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) Per ANSI, "Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them."