Features: Diode polarized Red corrosion resistant heat flowed epoxy finish Low current drain The Edwards 888D and 889D Series are diode polarized, heavy-duty, high decibel, vibrating horn signals. Intended for use in hazardous locations requiring electrical supervision of signaling circuit field wiring, including fire alarm systems. May also be used for unsupervised signaling applications. Two mounting brackets are provided on either side of the unit for wall mounting. Housing is tapped on one side for 3/4" (19 mm) conduit to allow fir field wiring installation. For use in dusty, ...

The Genesis WG4 series speakers and speaker strobes are suitable for a wide range of wet and harsh environments with a listed operating temperature range of -31°F to +151°F. They can be used indoors or outdoors and can be mounted flush or surface. Features: Outdoor or indoor rated Wall or ceiling mount Field selectable wattage (.25 - 2W) and voltage (25Vrms, 70Vrms) Standard candela output models (15 - 87cd), field selectable High candela output models (72 - 161cd), field selectable Room side wiring

The 116DEGEX-FJ is a regulated 24 volt, explosion proof fire alarm strobe that can be synchronized when connected to compatible Edwards fire alarm panels and power supplies or with the use of a separate synchronization module. The strobe is UL1971 listed with a 125cd ceiling rating and a 60cd wall rating. The strobe has a Class I Groups C & D, Class II Groups E, F, & G, and Class III rating and can be mounted indoors or outdoors (NEMA type 3R and 4X enclosure). The beacon can be wall, ceiling, or pendant mounted with the addition of separate mounting hardware.

The 105XBRM Series LED visual signals are heavy duty reliable UL cUL (General Utility) (misc. device/control unit accessory) beacons. The 105XBRM Series features a UL listed Type 4X enclosure and is UL Listed for Marine Use. These signals are designed for use in industrial applications or in applications where a Type 4X enclosure is required. The 105XBRM LED series come in a steady-on mode and can easily be set to a 65 fpm flashing mode. The base is manufactured from glass-reinforced thermoplastic polyester resin and the double fresnel lens is made of shatter resistant polycarbonate. 24V ...

Bracket mount attachment for 116DEGEX-FJ. Required for wall mounting of unit.