MP9020 - 1/2" Pipe die for METALpro MP9000 bender. The MP9000 uses one single die to complete a bend. These dies are designed specifically for the MP9000 bender.
Share
Spec Sheet
METALpro 1/2" Pipe Bender Die, 2-15/16" Bend Radius
Write a Review
|
Questions & Answers (0)
Product Description
PRICE
$179.95
1
1
Ships in 2 Business Days
Add or Change Zip Code(s)
Easy online or call-in returns. Read return policy
Specifications
Product Details
| Manufacturers Part Number | MP9020 |
| Country of Origin | Made in USA |
| Package Quantity | 1 |
| Brand | METALpro |
Related Products
X
MP9048 - 1-3/8" tube die for METALpro MP9000 bender. The MP9000 uses one single die to complete a bend. These dies are designed specifically for the MP9000 bender.
X
MP4152 - 3/4" Pipe Notcher Die for METALpro Ironworker (needs MP4150 notcher housing). These die sets fit into the METALpro MP4150 Pipe Notcher Housing to notch Schedule 40 pipe with any of the METALpro Ironworkers. Each die set is specific to the pipe size you are working with. This takes a singular notch out of one side of the pipe. The clean cut makes it ideal for welding two pipe together for that clean professional look. This is a great addition to anyone who is working with fences, gates, handrails, automotive, roll-cages, exhaust systems, structural setups, and more. Note - All ...
X
These die sets fit into the METALpro MP4150 Pipe Notcher Housing to notch Schedule 40 pipe with any of the METALpro Ironworkers. Each die set is specific to the pipe size you are working with. This takes a singular notch out of one side of the pipe. The clean cut makes it ideal for welding two pipe together for that clean professional look. This is a great addition to anyone who is working with fences, gates, handrails, automotive, roll-cages, exhaust systems, structural setups, and more. Note - All METALpro accessories are rated for mild steel
X
The dies are capable of performing bends of up to 90 degrees. The set comes with one die/shoe that can bend the following sizes; 1/2in., 3/4in., 1in., 1 1/4in., 1 1/2in. and 2 inch pipe in both schedule 40 and 80 wall thicknesses. The dies are machined from carbon steel plates to deliver substantially longer life than cast iron competitors.
X
These square punch and die sets are designed for METALpro Ironworkers. Each set comes with one upper punch and one lower die. The hole size is based on the upper punch. All sets come with our standard 2" lower die and 1/32" clearance from punch to the die. The hole size is based on the upper punch. Hole punch size must be equal to or greater than material thickness for best results. Rated For Use In Mild Steel Note: We Recommend The Punch And Die Set That You Are Using Is 1/32" Larger Than Your Bolt Size (EX. 5/16" carriage bolt would need 11/32" square punch and die set)