Global Industrial™ 2 Keys For Mortise Lock (Keyed Alike)

This 3'W x 8'H door hinges in either direction for left or right-hand hinged access. Fits 8'H partition sections. Made using 10 gauge steel wire woven mesh in a 1-1/2" diamond pattern. Framed in a 1-1/4" x 5/8" x 14-gauge cold rolled C-channel frame. Wire mesh is clinched (Not welded) into frame for strength. 3 sturdy hinges. Gray powder coat finish. FREE with each door Each door includes a Free 3" wide channel stiffener post to add extra strength and durability to the door frame and a built-in mortise cylinder lock with two sets of keys, keyed alike. 8 Ft. Door does not include a ...

WireCrafters RapidWire design provides an all-welded, modular, stackable system that is unequaled in the industry. Panels are 2" x 2" 10 GA Woven Wire welded into an angle frame. Posts are 14 GA 2" square tubing. Build wire partitions of any size and configuration with WireCrafters RapidWire Welded Wire Partition System. Construct walls and ceilings from same modular sized panels. Stack panels to desired wall height and bolt to posts using standard hand tools. Full line of hinged, double hinged, and sliding doors available. All hardware including floor anchors are included.

SLIDING GATE 10 x 4 This 10-feet high 4-feet wide gate can be installed to slide in either direction. Features ball-bearing suspension and an enclosed sturdy track kit to prevent misalignment. Includes lock receiver and Gate Stop. Gates for 10-foot high rooms include a 2'H transom. Made using 10 gauge steel wire woven mesh in a 1-1/2" diamond pattern. Framed in a 1-1/4" x 5/8" x 14-gauge cold rolled C-channel frame. Wire mesh is clinched (Not welded) into frame for strength. Gray powder coat finish. Includes built-in mortise cylinder lock with two sets of keys, keyed alike. Doors ...

TOP CAPPING CHANNEL Supplied in 10 foot long strips Top capping channel ties partition into a continuous, rigid line. Hardware not included. Splice plates are included with top capping. Order Top Capping in 10-foot sections. Calculate the total linear feet and round up to the nearest multiple of 10, then divide by 10 for the number of top capping sections. Example: Actual room size is 63' 7" linear feet. Order 7 top capping sections (70 ft. total). You can cut to size.

WireCrafters RapidWire design provides an all-welded, modular, stackable system that is unequaled in the industry. Panels are 2" x 2" 10 GA Woven Wire welded into an angle frame. Posts are 14 GA 2" square tubing. Build wire partitions of any size and configuration with WireCrafters RapidWire Welded Wire Partition System. Construct walls and ceilings from same modular sized panels. Stack panels to desired wall height and bolt to posts using standard hand tools. Full line of hinged, double hinged, and sliding doors available. All hardware including floor anchors are included.