RWM Casters 8" x 2" Elastometric Hi-Tensile Non-Marking Wheel for 1/2" Axle - RAB-0820-08-EHT-NM

RWM Casters 5" x 2" Durastan Phenolic Wheel with Roller Bearing for 1/2" Axle - 1000 Lb. Capacity Caster's Durastan Phenolic Wheels are molded from prime phenolic resin compounds for maximum density and strength. Durastan Phenolic Wheels are made of a special water resistant compound using a homogeneous fiber reinforcement that gives excellent service even in wet and cold applications. In addition, Durastan Wheels resist degradation, deterioration, corrosion from oil, grease, commonly used acids and solvents. Durastan Phenolic Wheels are recommended for all types of floors except ...

RWM Casters 4" x 2" V-Groove Iron Wheel with Roller Bearing for 1/2" Axle - 800 Lb. Capacity V-Groove Wheels are high strength cast iron (VI) castings or forged steel (VF) forgings machined with a 90° groove for operation on an inverted angle iron track. These wheels are used to control the flow of a load, i.e., into an oven, between machines, over long distances or where "production line" sequence is required. Care must be made to assure the inverted angle iron track is parallel to ensure smooth and constant tracking. In some cases it may be advisable to run inverted angle iron on ...

RWM Casters 5" x 2" Pinnacle Thermoplastic Wheel with Roller Bearing for 1/2" Axle - 1000 Lb. Cap. Pinnacle Glass Filled Nylon Wheels are ultra-tough thermoplastic non-marking wheels that are extremely durable and deflect floor debris with very high impact resistance. Pinnacle Glass Filled Nylon Wheels roll easily and are able to handle high load capacities requiring far less force to roll than other hard tread wheels. This very economical nylon wheel is resistant to water, most chemicals, solvents, salts and steam cleaning. Pinnacle Nylon Wheels are available with roller bearings, ...

RWM Casters 6" x 2" Polyolefin Wheel with Roller Bearing for 1/2" Axle - 700 Lb. Capacity Polyolefin wheels are an excellent low cost wheel. Polyolefin is a very durable plastic material. It has superior resistance to water and chemicals. It has better abrasion resistance than hard rubber and a remarkable ability to withstand impact. Polyolefin wheels can be used in a wide range of applications including bakeries, meat processing and packaging, dairies, food processing, laundries, supermarkets, offices, warehousing and manufacturing.

RWM Casters 8" x 2" Urethane on Polypropylene Wheel with Roller Bearing for 1/2" Axle 1000 Lb. Cap. The polyurethane tread is non-marking and offers a quiet ride, floor protection and excellent capacity ratings. These polyurethane wheels have a slight crown so that they maneuver very well. They are used in large numbers in the retail industry, shopping carts, platform trucks, etc. and can be washed down offering excellent sanitary applications. The polyurethane is mechanically bonded to a high-density polypropylene core. This mechanical bond eliminates bond separation in wet or submerged ...