Empty Rack for use with new 1300uL Pipette Tips and Refill Plates, 6/Pack

This unique stand holds up to 94 pipettes and rotates on a central vertical axis for convenient selection. Rotating disks are 18cm (7⅛") diameter. Instructions for quick assembly included. Lower disc consists of four concentric troughs with tapered sides and open bottoms which cradle the tips protectively Upper rotating disc has a grid pattern concentric with the bottom disc keeping the pipettes vertical Liquid draining off the pipette tip is retained on top of the stationary base by the outer rim Low center of gravity stabilizes the 48cm high (18³⁄₄") stand on the 23cm (9") diameter base

The Cleanware™ Pipette Rinsing System for pipette cleaning and storage has an effective, reliable design that ensures safe, efficient operation. Available in a complete system or in individual components. Pipette Rinsers provides a simple, automatic method for rinsing large numbers of pipettes at one time High level water entry provides an air gap between the maximum water level and the end of the water inlet tube ensuring safe and efficient operation "Tube within a tube" siphoning system assures rapid, complete and automatic siphoning and refilling over a wide range of inlet water ...

MTC's ProPette nUVaClean™ is the first and only pipette rack that not only organizes and protects six pipettes, but also destroys greater than 99% of unwanted contamination. The new nUVaClean™ uses a germicidal UV-C lamp. A high-efficiency reflector/concentrator completely bathes pipette shafts in 254nm UV light. This exposure destroys unwanted microbiological contaminants and prevents cross-contamination in PCR and other sensitive procedures. Just place single-channel pipettes of any range or brand in the nUVaClean™ and press the "start" button to begin the auto-decon ...

Dynarex® LabChoice Blood Collection Tube Holders are designed to provide effective connection to blood collection tubes and needles. These Tube Holders are constructed from translucent plastic materials for easy viewing and an easy-to-handle design for enhanced control. Features: Slim design allows for improved grip and easier handling Single-use and disposable for optimal hygiene Not made with natural rubber latex or DEHP

This 72 place wall mountable laboratory drying rack is perfect for draining and drying of all types of labware. The rack comes with a mounting kit to hang on the wall. The back plate of the support is made from a single mold of 4mm rigid high impact polystyrene (HIPS). The peg sockets have closed ends eliminating leakage and consequent biohazards. The seamless drip channel collects waste which drains via a supplied drain tube. The 72 (push in) pegs can accomodate items with a 15mm+ neck bore. They are easily removable for cleaning or to accomodate odd shaped items. Also included are 11 ...