Racks & Stands

Made for measuring sand and other settled matter in water and sewage, these Imhoff cones are molded of glass-clear, unbreakable styrene acrylonitrile. Use a Poxygrid®cone rack to support three or four Imhoff settling cones in a single row for clearer viewing. Cones have continuous graduations up to 1000ml and are ideal for tests where a high volume of settled matter is present Leakproof polyethylene plug permits easy withdrawal of sediment for gravimetric analysis and simplifies cleaning Cones graduated in these divisions: 0-2ml in 0.1ml, 2-10ml in 0.5ml, 10-40ml in 1ml, 40-100ml in 2ml, ...

Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter) Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F); autoclavable

This rotary separatory funnel rack consists of a rectangular base, screw-in column and a support disc held in place by a screw clamp. Support disc is fully adjustable for different heights up to 21" Open front type support holes for easy removal and placement of separatory funnels Includes 18 insert clips to accommodate different sized funnels. Shipped unassembled

Made especially for use with beakers and waterbaths, these space-saving racks are ideal for small quantities of tubes and for use in cell culture laboratories. Perfect for incubating microtubes in a beaker of water Buoyant TPX®brand polymethylpentene with tiny bubbles throughout for additional buoyancy Insert tubes from the top and easily remove them by pressing the rack down on the bench Withstands boiling for 30 minutes at 100°C (212°F) Steam autoclavable at 121°C (250°F) Leg length: 19mm (3/4"); thickness: 6.4mm (1/4")

Unique tabs protect your samples from loss and contamination. Place tubes in slots and slide under the tabs to keep tubes in place and caps closed when under pressure, floating or submerged. For use in water baths, ice or on the benchtop. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy lifting; stable feet keep the rack upright on the bench 95mm (3¾") outer diameter fits most 1000ml beakers Optional vortexing attachment; allows samples to be vortexed simultaneously ...