JET® End Piece Comp 800, WL9-2904550

The genuine Wilton part number WL9-2907600 Pipe Jaw Assembly, is sold for the combination vises listed below. When the old pipe jaws wear out or if you just need a set they just bolt on.You know r=that Wilton manufacturers quality products. For Use With: Jet C-3 (Before 1984) Combination Pipe and Bench Vise C-3 (After 1984) Combination Pipe and Bench Vise C-3 (After 1998) Combination Pipe and Bench Vise

Washer dimensions are: OD is approx. 2" and ID is approx 1-1/4"rnrnRing dimensions are: OD is approx. 2-13/16" and is ID is approx 1-7/16"rnrnDistance between two screw hole centers is approx 2-3/8"rnrnScrews are appox. 5/8" long. For Use With: Jet 500 (After 1998) Machinist Vise 500 (Before 1998 Old) Machinist Vise 500 (Before 1998 New) Machinist Vise 1780A (After 1998) Tradesman Vise 1780 (Before 1998) Tradesman Vise 2080 (Before 1998) Tradesman Vise

This authentic replacement item is designed for use with Wilton vise. This nut helps to secure spindle handle assembly and allows user to tighten or loosen vise grip. This assembly includes a metal but, bolt and a washer. Please note you would need a wrench installing/removing this item. For Use With: Jet 415 Mechanics Vise 656A Utility Vise 676 Utility Vise

This is a genuine Wilton replacement part for use with vises. The Serrated jaw inserts with used as a replacement jaw that fits on the sliding and stationary jaws. When the jaw is tightened down it will securely hold the workpiece. To install you will need an allen wrench. The components are made of high-quality metal. The item is sold individually. For Use With: Jet C-0 (Before 1998 New) Combination Pipe and Bench Vise C-0 (After 1998) Combination Pipe and Bench Vise 350 (After 1998) Machinist Vise 350 (Before 1998 New) Machinist Vise

Ring inner diameter is approx. 2"rnrnOuter ring diameter is approx. 3"rnrnThe washer inner diameter is approx 1-3/4"rnrnOuter Diameter is approx. 1-15/16"rnrnScrew holes are approx 3/16" For Use With: Jet C-2 (Before 1998) Combination Pipe and Bench Vise C-3 (Before 1984) Combination Pipe and Bench Vise C-3 (After 1984) Combination Pipe and Bench Vise C-2 (After 1998) Combination Pipe and Bench Vise C-3 (After 1998) Combination Pipe and Bench Vise 600 (After 1998) Machinist Vise 600 (Before 1998 ) Machinist Vise