JET® Jaw Insert Assy Ser 300, WL9-2903080

Prevent workpiece slippage with a fresh set of Wilton® pipe jaws for your 1780A Vise. Trust Wilton® for all your replacement parts.

Washer dimensions are: OD is approx. 2" and ID is approx 1-1/4"rnrnRing dimensions are: OD is approx. 2-13/16" and is ID is approx 1-7/16"rnrnDistance between two screw hole centers is approx 2-3/8"rnrnScrews are appox. 5/8" long. For Use With: Jet 500 (After 1998) Machinist Vise 500 (Before 1998 Old) Machinist Vise 500 (Before 1998 New) Machinist Vise 1780A (After 1998) Tradesman Vise 1780 (Before 1998) Tradesman Vise 2080 (Before 1998) Tradesman Vise

This is a genuine Wilton replacement part for use with vises. The Serrated jaw inserts with used as a replacement jaw that fits on the sliding and stationary jaws. When the jaw is tightened down it will securely hold the workpiece. To install you will need an allen wrench. The components are made of high-quality metal. The item is sold individually. For Use With: Jet C-0 (Before 1998 New) Combination Pipe and Bench Vise C-0 (After 1998) Combination Pipe and Bench Vise 350 (After 1998) Machinist Vise 350 (Before 1998 New) Machinist Vise

This is a genuine replacement part which is sourced directly from the original manufacturer for use with Jet and Wilton vises. The jaw is an important component which helps to provide a tight grip. It provides an identical replacement for a missing or a damaged part that was installed on a new unit. You may require a screwdriver or wrench when replacing this item. Two durable metal vise jaws and the hardware to secure them are included. Refer to the owner's manual of your model for the correct application. A screwdriver will be needed to perform the repair. For Use With: Jet 745 ...

Ring inner diameter is approx. 2"rnrnOuter ring diameter is approx. 3"rnrnThe washer inner diameter is approx 1-3/4"rnrnOuter Diameter is approx. 1-15/16"rnrnScrew holes are approx 3/16" For Use With: Jet C-2 (Before 1998) Combination Pipe and Bench Vise C-3 (Before 1984) Combination Pipe and Bench Vise C-3 (After 1984) Combination Pipe and Bench Vise C-2 (After 1998) Combination Pipe and Bench Vise C-3 (After 1998) Combination Pipe and Bench Vise 600 (After 1998) Machinist Vise 600 (Before 1998 ) Machinist Vise