Arc Flash & Flame Resistant Gloves

Features: Fabric/Material: Rubber Electrically tested and stamped with the initial test date Newly tested before shipment Must be put into use within 12 months of test date Once gloves are issued for use, they must be tested within 6 months from the date they were distributed to employees Should be worn with 10" leather glove protectors to increase the lifespan of the rubber voltage glove Leather glove protectors are not required to be marked with a date Class 00 - Max Use Voltage 500V AC/750V DC Arc Flash Compliance: NFPA 70E CSA Z462 ANSI/ASTM D120, Class 00, Type 1

Features: Fabric/Material: Rubber/Leather Rubber voltage gloves are electrically tested and marked with initial test date Enespro® FR knit gloves can be used with rubber voltage as a liner for added protection Enespro® FR knit gloves stretches for flexibility and dexterity Enespro® FR knit gloves RG: fits rubber voltage glove sizes 8-11 Enespro® FR knit gloves LG: fits rubber voltage glove sizes 10-12 Class 0 - Max Use Voltage 1,000V AC/1,500V DC Arc Flash Compliance: NFPA 70E CSA Z462 ASTM F1506 ANSI/ASTM D120, Class 0, Type 1 OSHA 1910.269

Features: Fabric/Material: Rubber Electrically tested and stamped with the initial test date Newly tested before shipment Must be put into use within 12 months of test date Once gloves are issued for use, they must be tested within 6 months from the date they were distributed to employees Should be worn with 10" leather glove protectors to increase the lifespan of the rubber voltage glove Leather glove protectors are not required to be marked with a date Class 0 - Max Use Voltage 1,000V AC/1,500V DC Arc Flash Compliance: NFPA 70E CSA Z462 ANSI/ASTM D120, Class 0, Type 1

Features: Fabric/Material: Rubber Electrically tested and stamped with the initial test date Newly tested before shipment Must be put into use within 12 months of test date Once gloves are issued for use, they must be tested within 6 months from the date they were distributed to employees Should be worn with 10" leather glove protectors to increase the lifespan of the rubber voltage glove Leather glove protectors are not required to be marked with a date Class 00 - Max Use Voltage 500V AC/750V DC Arc Flash Compliance: NFPA 70E CSA Z462 ANSI/ASTM D120, Class 00, Type 1

Features: Fabric/Material: Rubber Electrically tested and stamped with the initial test date Newly tested before shipment Must be put into use within 12 months of test date Once gloves are issued for use, they must be tested within 6 months from the date they were distributed to employees Should be worn with 10" leather glove protectors to increase the lifespan of the rubber voltage glove Leather glove protectors are not required to be marked with a date Class 2 - Max Use Voltage 17,000V AC/25,500V DC Arc Flash Compliance: NFPA 70E CSA Z462 ANSI/ASTM D120, Class 2, Type 1