Marathon Motors, G378, 056B17F5302, 1 1/2HP, 1800RPM, 115/208-230V, 1PH, 56H FR, TEFC

Pressure Washer Motor: 1.5HP, 3450RPM, 56 Frame, Totally-Enclosed, Fan-Cooled (TEFC), 115/208-230V, 1PH, Continuous duty, Manual thermal protection, 1.15 Service Factor, Rigid C Mount. Motors specially suited for hot or cold pressure washer applications and other single phase installations requiring minimum starting and running amperages. Capacitor start, capacitor run construction for reduced amperage. Double shield ball bearings prelubricated with Exxon POLYREX® EM lubricant, having operating temperature range of -20°F to +350°F and special formulation to provide extra long ...

Permanent Magnet DC Motors are available for 1/4 - 2 HP and wound field motors of 1/2 - 3 HP for Class I, Group D and Class II, Group F & G locations with listing by both UL and CSA. Applications include conveyors and mixers in hazardous locations. Features TEFC enclosure Shunt wound Class F insulation Designed for use with NEMA TYPE K SCR control 20:1 constant torque speed range (Except where noted) NEMA C-face and removable base (except on explosion proof models) Base welded on type 3513D only NEMA 182 and larger have a thermostat (normally closed contracts) on the field winding No dual ...

Baldor-Reliance Motor, ... Features: Ball bearing design 1 1/2 horsepower ratings are rated at 14 amps or less on 115 volts Manual thermal overload located in the conduit box UL and CSA recognized component approval 200°C copper windings. Typical Applications: Pressure washers, steam cleaners, portable and self contained stationary system for direct drive mount and coupled mount designs.

The Definite Purpose family of motors captures a host of variety demanded by the marketplace. These motors include TEFC and ODP Two-speed motors, as well as single phase Pressure Washer motors. This group of specialty motors includes Arbor Saw to Woodworking, Pre-1952 NEMA motors to SAE Hydraulic Pump motors. An extensive line of TEFC and ODP F-2 motors are available as well in 1 Hp through 60 Hp. The Automotive Approved motors, approved by major US automobile manufacturers, are available in cast iron designs and meet all requirements for sound power levels. A broad line of Design D Oil ...

Century, Farm Duty Single Phase Motor, Capacitor Start, Capacitor Run, Single Or Dual Voltage, 1 1/2 hp, 1725 rpm, 1 speed, 230/115v, TEFC, 7.5/15.0 amp, Reversible Counterclockwise, Ball/Ball bearings