Import 25Pc Transfer Punch Set - 1mm to 13mm by 0.5mm

These oblong punch and die sets are designed for METALpro Ironworkers. Each set comes with one upper punch and one lower die. The hole size is based on the upper punch. All sets come with our standard 2" lower die and 1/32" clearance from punch to the die. The hole size is based on the upper punch. Hole punch size must be equal to or greater than material thickness for best results. Rated For Use In Mild Steel Note: We Recommend The Punch And Die Set That You Are Using Is 1/32" Larger Than Your Bolt Size (EX. 5/16" bolt would need 11/32" oblong punch and die set)

For transferring the exact location of open and blind threaded holes to mating parts. While primarily designed for diemakers it has many other applications - locating fixtures, air cylinders, chucks, repairs etc. Set consists of 6 hardened screws nested in a combined holder and wrench. Each set is a complete tool; no wrenches or pliers are necessary.

Features: For transferring of threaded, drilled, and reamed holes Punches are made of heat-treated and tempered tool steel, and have a black oxide finish Diameters are .0025" undersize

MP8001 - 9/32" Round Punch and Die Set for METALpro Ironworker. These round punch and die sets are designed for METALpro Ironworkers. Each set comes with one upper punch and one lower die. The hole size is based on the upper punch. All sets come with our standard 2" lower die and 1/32" clearance from punch to the die. Hole punch size must be equal to or greater than material thickness for best results. Note - We recommend the punch and die set that you are using be 1/32" larger than your bolt size (ex. 5/16" bolt would need a 11/32" round punch and die set). Rated for use in mild steel

Features: For transferring of threaded, drilled, and reamed holes Punches are made of heat-treated and tempered tool steel, and have a black oxide finish Diameters are .0025" undersize Indexed stand