Anchor kit for Edge Of Dock Levelers

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. It comes complete with bumpers and installation instructions. Standard ramping is 29-13/16 inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down ...

Keep bugs and vermin out with dock corner seal. Gaping holes around the dock levelers is another challenging problem for facility managers. For years, companies have been trying to tackle "the gap" between the dock seals and the leveler. Whether the issue is energy loss or sanitation, the Dock Corner Seal fills the gap. The Dock Corner Seal's simple design makes it easy to install and it's durable to withstand the rigors of the loading dock environment, so saving energy and improving sanitation is simple and affordable. Includes the left and right side. Will fit up to a 12" gap. Package ...

Easy energy savings with the insulated Leveler Blanket™. Dock Levelers are energy hogs at your loading dock. Energy can be lost through the side gaps, the bottom door seal or by heat transfer through the dock leveler plate. Energy loss at your loading dock is a major drag on chillers, heating systems, and maintaining dock temperature for food safety. Lastly, energy loss has a negative impact on your operational expenses. The Leveler Blanket's simple design makes it convenient to place and lay on your leveler, so energy savings is easy when your door is not in use. Whether you use the ...

DLM PowerStop® TRUCK & VEHICLE RESTRAINTS Limit Trailer Creep & the Chance of Premature Truck Departure from your Dock This non-impact, self-aligning truck restraining system offers enhanced safety for your loading dock. Versatile restraint can be easily integrated with any mechanical, hydraulic or pneumatic leveler, and edge-of-dock or top-of-dock units. The low-profile PowerStop® restraint will withstand up to 30,000 lbs. of pull-out force and has a service range of 0" to 10" horizontally from the face of the dock bumpers and 12" to 29-½" vertically above the drive approach. Designed to ...

Bluff® EZ-Pull EDGE OF DOCK LEVELER Spring Lift System is engineered for One-Man Operation and Helps Eliminate Back Strain. Fast and easy to operate, the Bluff® EZ-Pull Dock Leveler is positioned by lifting and pulling the self-storing handle to the dock floor. The latch assembly activates the leveler lip forward to the floor of the trailer as the handle is lifted. When released, the handle automatically returns to the stored position when truck leaves. Included with each unit are twin 12-¾" x 10" bumpers that extend 16-¾" from dock face. Dock Leveler can accommodate trucks 5" lower or ...