RIDGID® Model No. 408 400 Series Instrument Bender, 1/2" Tube Size, 1-1/2" Bend Radius

The RIDGID® 600 Series Lever Benders are specially designed for bending hard tubing such as stainless steel, steel and titanium. A simple two-stage handle design easily switches to bend up to 180°, keeping bends in-plane and accurate. Features In-Plane: Two-stage design allows bends from 90° to 180° without ever crossing handles; lock/unlock with a half-turn rotation of the bending handle. Accurate: Roll dies in bending carriage reduce tube flattening (ovality). Gain marks on front of form ensure properly aligned bending angles. Reduced Force: Extra-long handles for ...

New improvements have made this family of conduit benders the most durable and economical bending system in the industry. Features: Internal thermostatic control will not scorch or burn conduit. Use in any in-place position. Thermostatic control heats pipe fast, even in cold or windy conditions. Multiple circuit design extends the life of the blankets. Multiple wound heavy-gauge wire ensures the longest life of any bending blanket.

Greenlee 849 Electric 1/2-2" Pvc Heater/Bender Features: Easy to use preheat for 10 minutes, insert PVC, rotate until pliable, remove and form bend Sturdy double wall metal with fiberglass insulation and reflective interior for fast, even heat Full length door for easy PVC loading and removal Other features include on/off switch, pilot light and carrying handle Heats 24 IN Long section of pipe

Ridgid Model No. 412M 400 Series Instrument Bender, 12mm Tube Size, 38mm Bend RadiusCombine accuracy with easy operation. Offset cushion grip handles for comfort when forming 180° bends. A 90° start angle and unique oil-absorbing shoe minimize bending effort while forming accurate bends in copper, steel and stainleSS steel tubing.

RIDGID® Model No. 606 600 Series Instrument Tubing Bender, 3/8" Capacity, 15/16" Bend Radius Ridgid Model No. 606 600 Series Instrument Tubing Bender, 3/8" Capacity, 15/16" Bend RadiusThe RIDGID 600 Series Lever Benders are specially designed for bending hard tubing such as stainleSS steel, steel and titanium. A simple two-stage handle design easily switches to bend up to 180°, keeping bends in-plane and accurate. Features In-Plane: Two-stage design allows bends from 90° to 180° without ever croSSing handles; lock/unlock with a half-turn rotation of the bending handle. ...