Customers Also Viewed
DC Gearmotor with Parallel Shaft. 1/20HP, 9 RPM, Gear Ratio 216 to 1, Overhung Load 474 Pounds, 268 Lb. In. Full Load Torque, Totally-Enclosed Non-Ventilated (TENV) Enclosure, 30 Frame, 90V, Name Plate Amps 0.54.
Unit is totally enclosed, permanent magnet DC gearmotor, performance matched for continuous duty. Features precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit box not included with motor.
Designed for mounting at any angle, but shaft up with motor below should be avoided to prevent leakage of lubricant into the motor should the motor's shaft seal fail. Overhung load capacities shown are at center of output shaft. The motor's stall torque exceeds recommended full load torques. A current limiting device such as an SCR control should be used to prevent damage. Model 300 gearmotors have the same mounting dimensions as Bison's 300 and many Dayton gearmotors
Click here to see our full selection of Motor Controls and Drives.
| Compatibility |
| Bison: 011-336-1208 |
| Bodine: 4147(Leeson gearbox mounting face includes 3-point mounting, Leeson armature voltage is 90V DC ) |
| Grainger/Dayton: 6A194 |
| Minarik: 507-01-104 | 507-01-105 |
| RAE: OPT14026GIL200 |
Product Specifications
- BRANDLeeson
- MANUFACTURERS PART NUMBERM1115025.00
- HORSEPOWER1/20
- GEAR MOTOR RPM9
- VOLTAGE90
- SERVICE FACTOR1
- ENCLOSURETENV
- FL AMPS0.54
- DUTYContinuous
- INSULATION CLASSF
- FRAME MATERIALSteel
- TYPE & FRAME STYLEP303-30E
- OUTPUT TORQUE (IN-LBS)268
- RATIO TO 1216
- SERIESP300
- ULYes
- CSAYes
- WEIGHT LBS9
- ROTATIONReversible
- OVERHUNG LOAD (LBS.)474
- AMBIENT TEMP C40
- MODEL985.603
- GEARHEAD / SHAFT TYPEParallel
- HP RANGE1/20 to 1/16
- RPM RANGE0-1000
- ENCLOSURE TYPETotally Enclosed
- is_motorYes
There are no questions for this product.
Leeson M1115025.00, 1/20 HP, 9 RPM, 90VDC, TENV, P300, 216:1 Ratio, 268 In-Lbs
$418.95
- Product Information
- Customer Review
- Product Q&A
Leeson M1115025.00, 1/20 HP, 9 RPM, 90VDC, TENV, P300, 216:1 Ratio, 268 In-Lbs
Item #: WBB234724
The item above has been added to your shopping list:
List name
Save Item to