JL Industries Multi Purpose Steel Access Panel, Cam Lock, White, 20" W x 30" H

Listed for 1-1/2 hour "B" label wall installation and 1 hour combustible/ 3 hour non-combustible ceiling installation. Features self-closing Door & Slam Lock Features: Frame & Trim are 16 gauge steel with a 1" flange Door is 20 gauge steel with 2" insulation on continuous hinge Welded-on masonry anchor

JLIndustries® Diamond Series Aluminum Roof Hatch - 36"W x 30"L R6 polyiso insulation in curb and cover help to reduce energy costs. Curb and cover are constructed of 11 gauge weather-resistant, mill finish aluminum, 18 gauge cover liner and continuous EPDM gasket. Counterbalanced springs and locking hold-open arm allow single-handed operation of cover so that operator can maintain 3 points of contact with ladder. The indented Diamond Grip™ design secures the roofing membrane and backer rod for easier installation. Hardware is zinc-plated including inside and outside handles and ...

Steel, Fire Rated Access Door for Walls & Ceilings. With an insulated door panel, this unit has a UL 90-minute label for walls with a maximum temperature rise of 250 degrees after 30 minutes. This unit is also test up to 3 hours in ceiling applications and carries a Warnock Hersey rating for ceilings. Self Latching, 1 Latch. White Finish. 26"W x 26"H Outside Flange Dimensions. 24-1/8"W x 24-1/8"D x 2-9/16"H Return Flange Dimensions.

The Press-Fit door is a unique lightweight door that installs easily by bending the tabs on the return back to grip the drywall. The frame, return and doorstop are one-piece construction with a beveled frame resulting in an attractive finished look.

JLIndustries® Diamond Series Aluminum Roof Hatch - 48"W x 48"L R6 polyiso insulation in curb and cover help to reduce energy costs. Curb and cover are constructed of 11 gauge weather-resistant, mill finish aluminum, 18 gauge cover liner and continuous EPDM gasket. Counterbalanced springs and locking hold-open arm allow single-handed operation of cover so that operator can maintain 3 points of contact with ladder. The indented Diamond Grip™ design secures the roofing membrane and backer rod for easier installation. Hardware is zinc-plated including inside and outside handles and ...