VizCon TrafFix Devices Plastic Safety Drum With High Intensity Sheeting

Works with 55 and 30-gallon plastic, steel and fiber drums. The unit has a solid steel chute. All steel construction. Standard features include: 56 frame, ¾ HP motor, 120V single phase, 60Hz with an 8 foot long power cord and plug. Upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.

Goodway's ScaleBreak® descaler quickly dissolves mineral deposits like limescale and struvite safely. This high-performance biodegradable industrial descaler will quickly dissolve calcium, lime, rust, and other types of deposits from passages in water-cooled or heated equipment, like chiller tubes, flywheels, boiler tubes, brazed plate heat exchangers, and so much more. It is safe for use on steel, iron, brass, copper, plastic, and rubber. When used as directed, it will help improve the operating efficiency and extend the life of your equipment.

TrafFix Channelizer Drum™ to be minimum 18" wide throughout its 40" height, regardless of orientation. "D" shape design minimizes rolling after impact. Must be NTPEP tested & meets MUTCD. Available in three variations: high density, low density, or contractor low density. Four base options: sand bag, san-fil, recycled rubber, or tire ring ballast.

Lifts, Palletizes and Transports Foot pump pedal activated heavy-duty hydraulic jack. For use with 30 and 55 gallon steel, plastic or fiber drums with top lip. Outriggers pivot out for access to drums on pallets. Four 8" x 2" phenolic casters. Rear casters include foot-operated wheel brakes. Push handle folds down for easy access to ratchet and foot pump. Heavy-duty welded steel construction with a powder coat yellow finish. Unit jaw service range is 31"H to 49"H. 1500 lb. capacity.Note: Number of Foot Pumps to Raise the Drum = 22.

TrafFix Channelizer Drum™ to be minimum 18" wide throughout its 40" height, regardless of orientation. "D" shape design minimizes rolling after impact. Must be NTPEP tested & meets MUTCD. Available in three variations: high density, low density, or contractor low density. Four base options: sand bag, san-fil, recycled rubber, or tire ring ballast.