Prevost Polyurethane Spiral Hose 20' Black with Non-Scratch Fittings and 1/4" MNPT THD Connections

This 50 foot nylon re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon re-koil hose is perfect for connecting to overhead air lines to keep the hose off the floor and resists abrasion. Maximum working pressure of 200 PSI at 70 degrees Fahrenheit. 1/4" male national pipe thread 1/4" hose inside diameter Working temperature range of -40 degrees Fahrenheit to 180 degrees Fahrenheit

This 20 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Polyurethane re-koil hose is perfect for connecting to overhead air lines to keep the hose off the floor and resists abrasion. Maximum working pressure of 125 PSI at 70 degrees Fahrenheit. 1/4" male national pipe thread 3/8" hose inside diameter Working temperature range of -50 degrees Fahrenheit to 180 degrees Fahrenheit

This 10 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Polyurethane re-koil hose is perfect for connecting to overhead air lines to keep the hose off the floor and resists abrasion. Maximum working pressure of 125 PSI at 70 degrees Fahrenheit. 1/4" male national pipe thread 1/4" hose inside diameter Working temperature range of -50 degrees Fahrenheit to 180 degrees Fahrenheit

Thermo-rubber hose for LP gas and natural gas. UL listed and CSA certified. 350 psig maximum pressure. Male pipe fittings on each end with female swivel fittings attached. For use on DG250, DG400, S405, 1800B, 950H, S1505B, 1200DF, VG175, VG400, VG500, and VG700C. This product is made in USA.

This 12 foot nylon ReKoil hose is assembled with reusable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon re-koil hose is perfect for connecting to overhead air lines to keep the hose off the floor and resists abrasion. Maximum working pressure of 200 PSI at 70 degrees Fahrenheit. 1/4" male national pipe thread 1/4" hose inside diameter Working temperature range of -40 degrees Fahrenheit to 180 degrees Fahrenheit