SP Bel-Art Check Valves, ³⁄₃₂" Bore, ⁵⁄₁₆ to 1/4" Taper, LDPE 12Pk

Chrome plated brass connectors with Buna-N O-Ring, made by Colder Products, feature easy-to-use slide locks for leak-free, in-line connections, and automatic shut off when disconnected. Ideal for liquid and gas connectors in biomedical instrumentation and general industrial applications Hose barb ends accept flexible tubing Chrome plated valves provide dependable operation Operate at temperatures to 82°C (180°F), pressures to 1.7 Mpa (250 psi), and vacuum to 30 microns of Hg

Features: Made from 6/6 nylon - exhibits strength, moderate stiffness, high service temperature, high impact resistance and tensile strength. Resistant to fuels, lubricants and many chemicals, but vulnerable to attack by phenols, strong acids oxidizing agents. Used in fuel line, vacuum systems and general purpose applications: automotive industry approvals. Temperature Range -50°F to 275°F. Pressure 150 psi at 70°F.

A needle type, Teflon®O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob. Outlet accepts 16mm I.D. (⅝") tubing F30852-0000 fits standard steel drums H30857-0000 has a male threaded outlet that accommodates garden hose coupling standard 19mm - 4.53 threads per cm (¾" - 11.5 threads per inch)TEFLON®is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

Apache 40029017 JS3019 13-16" Band-It Jr. Carbon Steel Preformed Clamp w/ 3/8" Wide Band Vibration resistant lip wrap lock design. Lock is formed by a simple lever movement. No hammering or crimping. Unique buckle nest and smooth ID design reduces leak paths compared to Center Punch Clamps. Double wrapped for additional strength. Constructed of carbon steel with a 3/8" band width.

Large bore luers offer a higher flow rates than standard luers. Eldon James luers are Certified Laboratory Tested. Our luers have been tested for dimensional and performance requirements according to ISO 594-1 and 594-2 standards. This testing includes dimensional checks, as well as tests on the security of the assembled fittings for leakage under pressure and vacuum conditions. Test results are available upon request. Non-Animal Derived Materials - TPE, CVU, PP, and NK. In addition, these materials have a history of qualification in medical device, pharmaceutical and bioprocess ...