SP Bel-Art Quaverette Micro-Blade Vibrating Spatula, Stainless Steel, 8 1/4"

Hand-held, cordless homogenizer features a simple push in / pull out pestle exchange and is ideal for thorough and faster processing of one to many samples. Matched pestle tips and micro tubes can be used either with the homogenizer or with hand processing. Pestles and tubes assure tight tolerances and thorough homogenization and grinding of materials resulting in optimal efficiency of pellet reconstitution or re-suspension Pestles and tubes are chemical and heat resistant; colorant-free to eliminate potential leaching of heavy metals into samples Tubes have 25% thicker bottoms than ...

For taking samples of water, sewage, wastes and effluents from lakes, streams, tanks, or ponds, the water sample dipper provides a long reach for otherwise inaccessible spots. 1000ml graduated polypropylene plastic pitcher mounted on an aluminum tube handle Handle has 3 parts, a 91cm (3') lower section, a 112cm (44") telescoping section, and an additional 91cm (3') upper section Connections are made with spring buttons with adjusting steps, 15cm (6") apart Minimum handle length is 91cm (3'), maximum length is 274cm (9') Handle diameter is 2.5cm (1") with 2.2cm (7/8") telescoping tube

For convenient sampling from tanks, vats, streams, ponds, lakes, etc., these economy dippers are lightweight, easy to use and portable. Package includes dipper with 3-ft. handle and one 500mL (16 oz.) polypropylene cup. Thread on 500mL (16 oz.) polypropylene cup can be exchanged to reduce cross contamination Two pouring spouts on cup allow left or right pouring High-density polyethylene plastic handles are strong honeycomb tubes without inserts and are ribbed for a sure grip Handle end has a hook for hanging storage Replacement screw-on cup 500ml (16oz) is available and sold separately ...

These cloning cylinders facilitate the isolation of individual cell clones, each generated from a single cell, yielding a homogenous population of cells. To isolate a clone, a thin layer of grease is applied to the bottom edge of the cylinder and then inverted over the clone of choice. After adding a small volume of Trypsin or EDTA, the dish is incubated at 37°C (98.6°F) briefly until cells detach. Cells are then collected from inside the cylinder and transferred to another vessel for further growth. Cylinders are tapered so bottom edge is wider than the top ensuring a good ...

This compact, portable system is ideal for vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes and is available with the original strength or HiFlow pump. Self-contained system with 1.0 gallon bottle, tubing and vacuum pump is lightweight, compact and easy to use Practical whenever a house vacuum is absent or not working Built-in, maintenance free pump quickly and conveniently aspirates fluids HiFlow model has a stronger flow rate to work reliably with up to 8-channels, even with 4 channels empty HiFlow model includes quick ...