SP Bel-Art Straight Tubing Connectors for 1/8" Tubing, Polypropylene 12Pk

Features: Same physical and chemical resistance properties as Natural Polypropylene, but is less expensive. Fittings contain recycled runner material produced during virgin material, Natural Polypropylene production runs. Fittings are manufactured to the same tolerances and quality standards as our Natural Polypropylene fittings WP is not a USP Class VI material and is not lot traceable. Temperature Range -9°F to 150°F (66°C). Pressure 125 psi at 70°F.

Features: Formulated for biomedical and bioprocess applications. Temperature Range -9°F to 150°F (66°C) Pressure 125 psi at 70°F. Meets FDA requirements 21 CFR 177.1520(a)(3)(i) and (c)3.1a. PP material has a Drug Master File listing. Radiation stable and is resistant to solvents, chemicals, water and other inorganic environments. Resists most strong mineral acids and bases; however, it is subject to attack by oxidizing agents.

A needle type, Teflon®O-ring seal inside this polyethylene faucet prevents back pressure liquid from escaping through the operating knob. Outlet accepts 16mm I.D. (⅝") tubing F30852-0000 fits standard steel drums H30857-0000 has a male threaded outlet that accommodates garden hose coupling standard 19mm - 4.53 threads per cm (¾" - 11.5 threads per inch)TEFLON®is a registered trademark of The Chemours Company FC LLC and used under license by Bel-Art Products, Inc.

2" Polypropylene Camlock Fitting - Male Coupler x FPT Thread Replace Old, Worn Out Or Broken Camlock Ends And Couplers. These Camlock fittings are made of impact resistant polypropylene that is great for nylon transfer pumps and general purpose water pumps. Camlock ends help easily attach hoses and tubing to water pumps. Dust Caps & Plugs help seal intake and outlet openings on water pumps and hoses for closure when not in use. Seals out leaks and prevents debris and materials from entering pump.

Features: Fittings exhibit the same physical and chemical resistance properties as Natural Kynar®. Fittings contain recycled runner material produced during virgin material, Natural Kynar® production runs. Applications that do not require lot traceability or a material that meets USP Class VI requirements, PVDF fittings represent an excellent value. Temperature Range -50°F to 275°F. Pressure 150 psi at 70°F.