K2® Tethered Float Switch For Sump Pits and Basins, 125 Volt, 13 Amps

The "SinkWire" Float Switch Connection Kit is a must for connecting any float switch where the wiring connections are subject to wet conditions. Many float switches fail because water enters the switch through the wiring. Using the "SinkWire" Float Switch Connection Kit ensures that your float switch will last through the years. Each kit contains (2) Black Shrink Wrap Connectors for "No-Connect" Wires, (2) 9mm Black Shrink wrap tubing used for water prevention over SO cord jacket, (4) 14-16 AWg Shrink Connectors for Single End to End Connections, (2) 10-12 AWG Shrink Connections For ...

The "SinkWire" Float Switch Connection Kit is a must for connecting any float switch where the wiring connections are subject to wet conditions. Many float switches fail because water enters the switch through the wiring. Using the "SinkWire" Float Switch Connection Kit ensures that your float switch will last through the years. Each kit contains (2) Black Shrink Wrap Connectors for "No-Connect" Wires, (2) 9mm Black Shrink wrap tubing used for water prevention over SO cord jacket, (4) 14-16 AWg Shrink Connectors for Single End to End Connections, (2) 10-12 AWG Shrink Connections For ...

This Unit Has a Piercing 120 dB Siren, Self-Charging LiPo Battery Powers the Sump Alarm During Outages for up to 1 Week. This Sump Pump Monitor is Intended for Indoor and Clear Water Applications Only. It Features Built-in Test and Silence Capabilities. Ideal for Those Who Want to Forgo a Complicated Wi-Fi Setup, This Sump Pump Alarm Straps Directly to the Discharge Pipe with Included Mounting Accessories. Its Float Switch with 15 Ft. Cord Will Not Interfere with Sump Operation. It Comes Ready to Install with a Power Cord and Float Switch Bracket that Set up in Just a Few Minutes. This ...

This Sewage Float Switch and Septic Float Provide Reliable Measurement and Control of Wastewater Levels for Both Empty and Fill Applications. With its 16 Foot Cord and Self-Orienting Design Non-Tethered to Accommodate an Array of Needs, This Float Switch is Ideal for Medium to Heavy Amounts of Suspended Solids Designed for Sewage and Septic Applications. The SludgeBoss Float Switch is Controlled by a Honeywell Micro Switch and is Rated for Use with 12-24VDC and 120-240VAC. Directly Control Motors of up to ½ Horsepower (or 13 Amps) at 120- or 220-Volts AC for Non-Continuous Pump ...

Wi-Fi Enabled Sump Pump Monitor, 2.4GHz, Provides Detection for Sump Pump Levels. Level Sense will Send an Alert Before your Sump Overflows via E-mail and/or Text Message. The Device is Made for Indoor use, This Industry Leading Alarm Offers High or Low Level Detection and the Option for Many More Sensors. This Model Offers you Two Inputs that can Handle an Unlimited Number of Sensors. Alert if AC Power is Lost to the Unit (i.e. if power is out to your pump) Alert (after a duration you specify) if Internet Connection is lost. Sound an 90 dB Horn in the Event of an Alarm. The Low Profile ...