Plasticade XAPSPHALT Car Stop, Speed Bump & Speed Hump Installation Hardware- Asphalt Installation

Safety Garage Stop was designed for the home owner that continually finds it difficult to get in the garage without pulling in too far and hitting something: the bench, wall, or bicycle. The safety garage stop also creates an insulated area between the tires of your car, camper, boat, or RV and the concrete floor, eliminating flat spots on your tires. The safety garage stop also helps prevent vehicles from settling in the ground when used outdoors. The flat tongue uses vehicle weight to keep the chock from moving.

Help control drivers in dangerous areas while protecting people and property. One person installation makes them attractive for traffic control. Can be removed for seal coating, snow removal, or change of location. Constructed of lightweight recycled plastic. Resists marring by oil, road salt, sunlight and chemicals. Unlike lumber, it does not leach out polluting chemicals. Resists rotting, termite damage and corrosion. No costly painting or maintenance. Consult factory for tolerances and mold shrinkage. Hardware kits sold separately.

PROTECTIVE 72 INCH LONG PARKING CURB This parking curb stops cars in their tracks. Designed with safety and durability in mind, this parking curb withstands repeated abuse from cars and trucks. Made of high density polyethylene that is weather, chemical and UV resistant. Parking stop is flexible enough to fit parking lot contours. Includes hardware for installation. This item can be installed in asphalt or pre-drilled concrete before installing (Rebar spikes are 1/2 Inch outer diameter). Measures 72"L x 8"W x 4"H.

✓ 66,000 lbs max capacity ✓ UV-protected rubber with hi-viz reflector tape ✓ 8 holes for permanent/semi-permanent installation Ideal for permanent or temporary installation on asphalt or concrete, the 72"-long Global Industrial™ Portable Rubber Speed Bump is used to maintain and control vehicle speed through high traffic industrial and commercial areas including parking lots, pick-up/drop-off lanes, or drive-through lanes. It is made of an ultra-violet (UV)-protected black rubber with highly-reflective molded cats-eye reflector tape that enhances ...

Combine 2 foot sections to create required length. Made of 100% post consumer recycled rubber. Has 2 reflective yellow stripes. Withstands heavy traffic at 10 mph, won't warp, chip, or crack. Use 6 ea. XASPHALT per speed bump for asphalt installation or 6 ea. XCONCRETE for concrete installation.