Forklift Bumpers & Guards

GKS Perfekt® "Forklifter" FORKLIFT JACK Specifically Developed for Forklift Maintenance and Repair. This jack features a robust design that allows forklift trucks, industrial vehicles and textile machinery to be lifted for service. Jack features a stable base plate with integral feet for maximum stability. The 4.7"L toe is equipped with gearing in its forward section to counteract any slipping of the load. Low-profile toe features three height adjustments for applications with higher ground clearance, Max Toe Loading Height is 4-7/8" & Min Toe Loading Height is 1-3/16" and the top saddle ...

Safe-T-Alert® 3500 Series Back-Up Alarm - 87-112DB - 12-24 Volt - Self-Adjusting Back-up alarms are constructed of polypropylene, epoxy sealed against dust & moisture. Alarms are self adjusting and are steam cleanable. Alarms are 12-24vdc. Alarm Decibel ranges from 87db to 112db. Conform to CE, cUL/UL standards. Polarity protected. 2 Year Limited Warranty.

The Forklift Side Red Spotter by Ideal Warehouse PEDESTRIAN WARNING FORK LIFT SPOT LIGHT Help Prevent Personnel and Pedestrian Collisions! The Forklift Side Spotter provides a visual warning for warehouse and shipping personnel by projecting a bright red spot light beam pattern onto the floor, on either sides of the forklift, helping to promote greater workplace safety. This red glow is a visual indicator of the safe distance pedestrians should keep between themselves and the forklift. By staying outside of this perimeter, pedestrians will avoid foot injury and collision from rear end ...

Ideal Warehouse FORKLIFT ERGO BACK-UP HANDLE Reduce Back Strain and improve Forklift Driver Ergonomics. Forklift operators who are required to frequently travel in reverse tend to grab the overhead guard. This dangerous practice can result in serious injuries. The forklift Ergo Back-up Handle is placed inside the overhead guard and allows the forklift operators hand to remain within the forklift at all times, giving him something to grab onto while reversing the forklift. Handle reduces back strain and provides a safer place to set the hand. An integral horn switch allows the operator to ...

Utilizes The Din 43589-1 Form Factor, Which Has Been Specially Configured For North American Fast Charging Systems - Awg/Mm Contacts & Tooling - Up To 4 Auxiliary Contacts - Can Be Used For Battery Monitoring & Charging - Low Mating Forces - Connectors Can Be Mated & Unmated Without The Necessity Of Added Hardware - Hexagonal Voltage Key For 24, 36, 48, 72, 80 & 96V - Key Prevents Mating Of Different Operating Voltages - 'A' Series Connectors Are For American Wire Gauge Cable & Mee: Din -Norm/Din-Standard Din43589