Flooring Screws

Brass Wood Screws are manufactured with an aggressive thread style that has a higher degree of grip strength when used on materials such as plywood, lumber and other woods. They are made with a countersunk head that provides a flush surface after installation and are manufactured from solid brass for corrosion resistance. When working with wood screws it is suggested that a pilot hole slightly smaller than the diameter of the fastener be used to prevent materials from splitting. Special Features: Provides a Flush Surface, Aggressive Threads, High Degree of Grip Strength, Rust Resistant ...

430 Piece Wood Screw Assortment - #4 to #10 - Slotted Flat/Round Head - Zinc Contents: 10 x 1" Wood Screw - Slotted Flat Head - Zinc Plated (15) 10 x 1-1/2" Wood Screw - Slotted Flat Head - Zinc Plated (15) 4 x 1/2" Wood Screw - Slotted Flat Head - Zinc Plated (50) 4 x 3/4" Wood Screw - Slotted Flat Head - Zinc Plated (50) 6 x 1/2" Wood Screw - Slotted Flat Head - Zinc Plated (25) 6 x 3/4" Wood Screw - Slotted Flat Head - Zinc Plated (25) 6 x 1" Wood Screw - Slotted Flat Head - Zinc Plated (25) 8 x 3/4" Wood Screw - Slotted Flat Head - Zinc Plated (20) 8 x 1" Wood Screw - Slotted Flat ...

Wood Screws are manufactured with an aggressive thread style that has a higher degree of grip strength when used on materials such as plywood, lumber and other woods. They are made with a countersunk head that provides a flush surface after installation. When working with wood screws, it is suggested that a pilot hole, slightly smaller than the diameter of the fastener, be used to prevent materials from splitting. Add to submittal Special Features: Provides a Flush Surface, Aggressive Threads, High Degree of Grip Strength, Zinc Plated Material : Carbon Steel Applications: Plywood, Lumber, ...

12X1 1/4 Phillips Flat Full Body 2/3 Thread Wood Screw Black Oxide and Oil. Wood screws produce a mating thread when assembled into wood or other resilient materials. Flat head screws are used when protrusion of the fastener above the mating surface is unacceptable. Typically 100 degree flat or for fastening softer materials, 82 degrees flat.

Self-drilling (TEK) point drywall screws are used for thicker metal studs.