Crossover Ladders

Cross Over Ladder - Five Steps This Cross Over Ladder mounts where you need permanent access at crossover points. The upper platform features removable two sided 42" high handrail with 21" mid-rail and fixed 4" toe boards to prevent objects from rolling off. Serrated steps for extra grip and safety are 24" wide and 7" deep with a step height of 10". The overall ladder width is 29". Ground legs include rubber feet for stability. All welded steel construction with removable handrails. Capacity is 500 pounds. Platform is 23-1/2" wide and 50" high. Meets OSHA 29 CFR 1910.24 and ANSI A14.7 ...

Mount where you need permanent access at crossover points. The upper platform features removable handrail and fixed toe boards to prevent objects from rolling off. Serrated platform for extra grip. Top half of steps covered in grip material for safety. Ground legs include floor mounting pads. Units must be anchored to the floor. Units are all steel construction and can be knockdown for storage and shipping. Meets OSHA 29 CFR 1910.27. Baked-in powder-coated toughness. High handrail for supreme safety

Transform your Vestil™ poly step stool into a premium design with this complete options kit! The kit includes caster brackets, wheels, handrail assemblies and hardware. Not only does this kit allow the stool to be pushed or pulled from work area to work area, but it adds safety as well. The elevated handrails provide the user with a sense of balance while climbing or descending the step stool. Features: Handrails are built of steel with a powder coat finish 3" hard rubber casters Rounded corners for user safety Includes back rail assembly for increased care

A poly step stool is a great asset for on the go or in a permanent setting. A lightweight design with front and side cutout handles, allow the user to easily transfer the stool to a preferred spot. The taped step surfaces ensure safe footing while traversing up and down the steps. Steps can be nested to minimize footprint when not in use. Features: Anti-slip step surface Low density polyethylene construction Nestable design for simple storage Colored yellow for added safety and awareness

U-Design Crossover 20" Bridge Span with 24" wide grip strut tread. Includes guardrails and toe board. Combine with additional 20" spans or 30" spans to create the desired crossover span distance. Up to 3 span combinations of any size does not require an additional leg kit for support. Powder coated yellow finish. Click the Specifications button to the right to access the U-Design Configurator, which provides a simple step-by-step selection process to configure your ladder. Must be purchased with ladder units, turn platforms, and/or leg kits as required.