Crossover Ladders

U-Design Crossover 4 step ladder on a 50 degree stairway incline with 24" wide perforated steps. Can be used on either side of the Crossover and be paired with any other 4 step ladder regardless of the incline. Powder coated yellow finish. Click the Specifications button to the right to access the U-Design Configurator, which provides a simple step-by-step selection process to configure your ladder. Must be purchased with leg kits, crossover bridges, and/or turn platforms as required.

U-Design Crossover 30" Bridge Span with 24" wide grip strut tread. Includes guardrails and toe board. Combine with additional 30" spans or 20" spans to create the desired crossover span distance. Up to 3 span combinations of any size does not require an additional leg kit for support. Powder coated yellow finish Click the Specifications button below to access the U-Design Configurator which provides a simple step-by-step selection process to configure your ladder. Must be purchased with ladder units, turn platforms, and/or leg kits as required.

U-Design Crossover 20" Bridge Span with 24" wide grip strut tread. Includes guardrails and toe board. Combine with additional 20" spans or 30" spans to create the desired crossover span distance. Up to 3 span combinations of any size does not require an additional leg kit for support. Powder coated yellow finish. Click the Specifications button to the right to access the U-Design Configurator, which provides a simple step-by-step selection process to configure your ladder. Must be purchased with ladder units, turn platforms, and/or leg kits as required.

Cross Over Ladder - Three Steps This Cross Over Ladder mounts where you need permanent access at crossover points. The upper platform features removable two sided 42" high handrail with 21" mid-rail and fixed 4" toe boards to prevent objects from rolling off. Serrated steps for extra grip and safety are 24" wide and 7" deep with a step height of 10". The overall ladder width is 29". Ground legs include rubber feet for stability. All welded steel construction with removable handrails. Capacity is 500 pounds. Platform is 23-1/2" wide and 30" high. Meets OSHA 29 CFR 1910.24 and ANSI A14.7 ...

U-Design Crossover 20" Bridge Span with 24" wide perforated tread. Includes guardrails and toe board. Combine with additional 20" spans or 30" spans to create the desired crossover span distance. Up to 3 span combinations of any size does not require an additional leg kit for support. Powder coated yellow finish. Click the Specifications button below to access the U-Design Configurator which provides a simple step-by-step selection process to configure your ladder. Must be purchased with ladder units, turn platforms, and/or leg kits as required.