Conduit Boxes

In applications where only single phase power is utilized, these motors are available from 1/12 Hp through 15 Hp in TEFC and ODP designs. Standard foot mounted configurations are available, as well as C-Face foot mounted and C-Face footless. These are also offered in 1/4 Hp through 5 Hp as Super-E® Premium Efficient motors where energy savings is desired. Features Ball bearing design 1-1/2 horsepower ratings are rated at 14 amps or less on 115 volts Manual thermal overload located in the conduit box UL and CSA recognized component approval 200°C copper windings Application(s) ...

Baldor-Reliance Motor, ... Features: Ball bearings, lubricated with high temperature moisture-resistant grease Condensation drains Gasketed cast conduit boxed Farm duty epoxy paint for protection from harsh environments 1.00 Service Factor Typical Applications: Wide variety of agri-duty and industrial applications.

Baldor-Reliance Motor, 200HP,1785RPM,3PH,60HZ,447T,TEFC Features: 1.15 Service Factor Corrosion resistant epoxy finish Regreasable ball bearings Oversized rotatable cast iron conduit box Forsheda® shaft seal Moisture resistant copper windings Class F insulation Stainless steel nameplate and corrosion resistant hardware Tropicalized Typical Applications: Typical applications include petro-chemical plants, mines, foundries, pulp and paper plants, waste management facilities, chemical plants, tropical climates and other processing industry applications requiring protection against corrosion ...

Baldor-Reliance Motor, ... Features: Ball bearings, lubricated with high temperature moisture-resistant grease Condensation drains Gasketed cast conduit boxed Farm duty epoxy paint for protection from harsh environments 1.00 Service Factor Typical Applications: Wide variety of agri-duty and industrial applications.

Baldor-Reliance Motor, 5HP,1750RPM,3PH,60HZ,184T,3643M,TEFC,F1 Features: Standard NEMA BA dimension Spring set brake Power off operation manual release NEMA Premium® Efficiency and inverter-ready 230/460V brakes are connected in conduit box Typical Applications: Machine tools, conveyors, door operators, speed reducers, any application requiring quick stops and positive hold.