1/4X2 Flat Head Split Drive Anchor Zinc, Pkg of 100

Drive anchors are used to set anchors into concrete. They are placed into pre-drilled holes and hammered in, expanding the anchor in the process.

Zamac Anchors with Removable Screw are suitable for use in concrete, block, brick or stone. They are a unique, one-step nail drive anchor that features a Phillips style head. The body of the anchor is formed from corrosion resistant Zamac alloy and a zinc plated carbon steel drive screw. When compared to a traditional Zamac Anchor, the ZAS has been designed to provide a removable anchor with higher tension loads when installed in concrete. These anchors are not recommended for use overhead or applications where holding values are critical.

Zamac Anchors are nail drive anchors manufactured from a Zamac alloy, resulting in a corrosion resistant body. They can be used in concrete, block, brick or stone and in light duty or tamper resistant applications. These anchors are not recommended for use overhead or applications where holding values are critical.

Hammer Drive Anchor - 1/4" x 1-1/4" - Mushroom Head - Steel - Zinc - Pkg of 100 - BBI 265020 Hammer Drive Anchors can be used in concrete, block, brick or stone. They are easily and quickly hammered into pre-drilled holes. The nail acts as an expansion and locking pin, and is relatively tamper-proof.

Internal Threaded. Anchor is installed with a like-sized setting tool. Anchor body & expander plug: All Steel Zinc.