Ergodyne® Arsenal® 5973 Hoist Bucket Tool Bag w/ D Ring & Zipper, Large, Gray

The Squids 3178 Locking Aerial Bucket Hook features a self-locking exterior hook, a non-locking interior hook and an enclosed tethering point to save space and prevent dropped objects when working in cramped buckets. Simply clip to the bucket lip for safe anchoring of tool buckets, bags, aprons, tool lanyards and other equipment. Built for durability in demanding environments, the heavy-duty nylon hook is approved to a 40lbs // 18.14kg static hold with a 7lbs // 3.2kg dynamic drop rating for tool lanyards. The self-locking outer hook with thumb release is designed for ease of use while ...

The Squids® 3111F(x) Tool Lanyard features a stainless-steel auto-locking carabiner with a captive eye on both ends to tether tools up to 15lb / 6.8kg and prevent dropped or falling objects from occurring on the job. This shock-absorbing lanyard is designed and tested to reduce the force on your body if a drop occurs by absorbing the energy transmitted through the tool lanyard. This design prevents the tool from pulling the user down with it by reducing the shock load, protecting those above as well as those below. The low-profile design reduces snag hazards and is made from a durable ...

The Squids® 3785 Split Ring Tool Attachment (10-pack) is designed to create a larger retrofit attachment point on tools with small captive holes for tethering tools up to 2lbs // 0.9kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools with small captive holes. While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. STRAIGHTFORWARD INSTALLATION To install, simply open the ...

The Squids® 3791 Locking Collar with Tool Attachment Point installs onto connecting, sleever and wrecking bars to create a retrofit attachment point for tethering tools up to 7lbs // 3.2kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on connecting, sleever and wrecking bars with no captive holes. While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult. Straightforward Installation To ...

The Squids® 3156 Coil Tool Lanyard with Single Carabiner is compact and used to tether small hand tools, PPE like hard hats or even cell phones and tape measures to prevent falling objects when working at-heights. Built and tested to endure tough conditions and rated to support weight up to 2lbs / 0.9kg, the coiled lanyard is made with a low-profile design and durable plastic. With the lightweight aluminum carabiner on one end and a tethering loop on the other, it easily connects to tool anchors and attachments, even while wearing gloves. The coiled tether design reduces lanyard length to ...