For Use With:
- Jet C-2 (After 1998) Combination Pipe and Bench Vise
Share
Spec Sheet
JET® Casing Nut Assy C2, WL9-2900170
Write a Review
|
Questions & Answers (0)
Product Description
For Use With:
PRICE
$129.95
1
1
Ships in 5 Business Days
Add or Change Zip Code(s)
Easy online or call-in returns. Read return policy
Specifications
Product Details
| Manufacturers Part Number | WL9-2900170 |
| Type | Replacement Part |
| For Use With | Combination Pipe and Bench Vises |
| Brand | JET |
Related Products
X
The genuine Wilton part number WL9-2907600 Pipe Jaw Assembly, is sold for the combination vises listed below. When the old pipe jaws wear out or if you just need a set they just bolt on.You know r=that Wilton manufacturers quality products. For Use With: Jet C-3 (Before 1984) Combination Pipe and Bench Vise C-3 (After 1984) Combination Pipe and Bench Vise C-3 (After 1998) Combination Pipe and Bench Vise
X
This authentic replacement item is designed for use with Wilton vise. This nut helps to secure spindle handle assembly and allows user to tighten or loosen vise grip. This assembly includes a metal but, bolt and a washer. Please note you would need a wrench installing/removing this item. For Use With: Jet 415 Mechanics Vise 656A Utility Vise 676 Utility Vise
X
Washer dimensions are: OD is approx. 2" and ID is approx 1-1/4"rnrnRing dimensions are: OD is approx. 2-13/16" and is ID is approx 1-7/16"rnrnDistance between two screw hole centers is approx 2-3/8"rnrnScrews are appox. 5/8" long. For Use With: Jet 500 (After 1998) Machinist Vise 500 (Before 1998 Old) Machinist Vise 500 (Before 1998 New) Machinist Vise 1780A (After 1998) Tradesman Vise 1780 (Before 1998) Tradesman Vise 2080 (Before 1998) Tradesman Vise
X
Ring inner diameter is approx. 2"rnrnOuter ring diameter is approx. 3"rnrnThe washer inner diameter is approx 1-3/4"rnrnOuter Diameter is approx. 1-15/16"rnrnScrew holes are approx 3/16" For Use With: Jet C-2 (Before 1998) Combination Pipe and Bench Vise C-3 (Before 1984) Combination Pipe and Bench Vise C-3 (After 1984) Combination Pipe and Bench Vise C-2 (After 1998) Combination Pipe and Bench Vise C-3 (After 1998) Combination Pipe and Bench Vise 600 (After 1998) Machinist Vise 600 (Before 1998 ) Machinist Vise
X
Proudly made in the USA, the Combination Pipe and Bench round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, the Combination Pipe and Bench round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Combination Pipe and Bench vise is equipped with main ...