Marathon Motors F103, 3/4HP, 115/208-230V, 1800RPM, 1PH, TEFC, 56 FR

These motors are designed for many of the varied applications found on the farm. Designs include motors suitable for aeration fans, auger drives, grain stirring, metering pumps, instant reversing, irrigation tower drives, and crop driers.

Baldor-Reliance Motor, 3 AIR OVERHP,3450RPM,1PH,60HZ,145TZ,3535 Features: Lubrication fittings on Nema T frames for eazy on-site maintenance Ball bearings Corrosion protected with epoxy finish Normally-closed thermostats on three phase motors Typical Applications: Designed for powering aeration fans used on farm grain storage, exhaust fans, air handling systems, etc.

Baldor-Reliance Motor, 3-4.5 AIR OVERHP,3450RPM,1PH,60HZ,182Z,3 Features: Shaft 3/4 longer than NEMA standard Shaft keyed, drilled and tapped with internal 1/4-20 tap 1 deep 1.00 Service Factor Thermostats Epoxy paint Typical Applications: Specifically engineered for use on vane axial fan crop dryers.

WorldWide Electric, Farm Duty Motor, TEFC enclosure, IP54 degree of protection, High torque, 1.15 service factor, Class F insulation, VPI copper windings, Rigid base-56H, Capacitor start / induction run (1/3-1HP), Capacitor start/capacitor run (1.5-2HP) for reduced amperage and high torque, With manual overload, Drive-end shaft seal, Drive-end bearing retainer, Anti-rust film applied to rotor, Double-sealed ball bearings, Gasketed capacitor covers and junction boxes, Color coded and labeled motor leads.

Marathon, Farm Duty Single Phase Motor, Capacitor Start Capacitor Run, 5 hp, 1755 rpm, 1 speed, 230v, TEFC, 19.5 amp, Selective Counterclockwise, Ball/Ball bearings