Buyers Hydraulic Reservoir Accessories, Tc0015, Filler Breather Replacement Cap W/Chain - Min Qty 6

Typical Application: Hydraulic, instrumentation and chemical processing systems Pressure: Up to 10,000 PSI depending on tube size. Sealing Method: 3-piece flare Vibration Rating: Good resistance Material: Carbon steel - AISI/ SAE 12L14 Used With: Copper, brass, steel, aluminum and other tubing that can be flared. Advantage: Zinc plate, 3 piece design.Broad selection of styles and sizes.Interchangeable with all sources. Identifying Characteristics: Short nut with sleeve protruding. Material is generally steel or stainless. Conformance: Meets J.I.C., SAE (J154) Standards

Acts as ventilator to provide a free flow of clean, fresh air into hydraulic fluid, fuel, oil, chemical & coolant tanks or reservoirs Large oil resistant filter elements filter dirt & dust particles as small as 40 micron

Combination warning light & buzzer operate simultaneously for two way warning of hazardous conditions. For 12 VDC electrical systems. Red lens, snaps out for easy bulb replacement. (bulb included) 0.2 AMPS max draw 70 DB at 3 ft.

Buyers Filler-Strainer Breather Cap Assy w/Plastic Basket, TFAN3, 3.25" Cap Dia, 192 GPM Disp. Rust-Free breather cap assembly 1/4 Turn filler/breather (40 micron) cap w/ chain "Hydraulic Fluid Only" on cap (6) self-tapping screws (1) 30 mesh (500 micron) strainer basket (1) mounting flange w/ 2 gaskets High impact technopolumer construction 3.25" Cap dia Compatible w/petroleum, mineral and water based fluids Temp. range: -22° F to +240°F (-30°C to +115°C) Displacement: 192 GPM May be secured w/padlock (sold seperately)

Typical Application: Hydraulic, instrumentation and chemical processing systems Pressure: Up to 10,000 PSI depending on tube size. Sealing Method: 3-piece flare Vibration Rating: Good resistance Material: Carbon steel - AISI/ SAE 12L14 Used With: Copper, brass, steel, aluminum and other tubing that can be flared. Advantage: Zinc plate, 3 piece design.Broad selection of styles and sizes.Interchangeable with all sources. Identifying Characteristics: Short nut with sleeve protruding. Material is generally steel or stainless. Conformance: Meets J.I.C., SAE (J154) Standards