MORStop™ Tilt-Brake 3900i-P - Factory Installed on Morse® Manual Tilt Model Only

Morse® Below-Hook Drum Lifter - No Tilt - For 22"-23.5" Diameter Steel, Fiber or Poly Drums - 1000 Lb. Capacity Attach to your hoist or crane to transport an upright drum. The drum is secured by a ratchet and pawl mechanism and supported by a bar at the bottom. This ensures that your plastic, fiber or steel drum will be transported safely with no chance of sliding out. No tools are necessary. Once loaded, the unit carries the drum without tilting it. Handles steel, plastic or fiber drum with 22" to 23.5" (55.9 cm to 59.7 cm) diameter and 23" to 38" (58.4 cm to 96.5 cm) tall. Also accepts ...

Morse® Hand Drum Pump General Guide: Methyl Alcohol or Ethyl Alcohol up to 2000 SSU Viscosity Morse manual drum and barrel pumps provide a controlled discharge rate of approximately 1 quart (.95 liter) on complete forward and backward cycle at 10 psi over 24 feet (7.3 m). They fit the NPT (National Pipe Thread) of the 2" (5 cm) bung on 55 or 30 gallon (208 or 114 liter) steel drum. Adaptors are also available to use Morse 55-gallon (208 liter) barrel pumps with the buttress thread of the 2" (5 cm) bung on your plastic barrels. Suction lift tested for 15 feet (4.6 m) minimum Discharge head ...

Morse® PailPRO™ 5-Gallon Pail Handler - 60" Pour - Manual Lift & Tilt - 150 Lb. Capacity Lift, tilt and pour a 5-gallon pail with ease: Dispense at up to 5 feet high Easily maneuverable, compact design Simple handling with hand crank lift and hand wheel tilt Optional counterweight kit extends reach Use the Morse Pail Handler to lift, tilt, and position your 5-gallon pail weighing up to 150 Lb. (68 kg). Dispense up to 5 feet (152 cm) high. The Morse model 83 should be used for ergonomic advantage to reduce risks due to repetitive motion or heavy lifting of 5-gallon pails. Specific ...

Morse® Portable Drum Roller - 20 RPM - Air Motor Agitate your drums contents without opening the drum! Incorporate important ingredients and eliminate sediment in the bottom of your drum. Mixing in closed drums eliminates the hazards, worker exposure, and messy cleanup associated with insertion mixers. This compact, portable mixer and drum cradle rolls closed drum to blend the contents. You may also dispense directly from your drum through a faucet. The built-in tipping bar provides leverage to ease loading and unloading. The sides and back are enclosed to protect the drive. Roll a drum ...

Morse® MORplug™ Ductile Iron Drum Wrench MORplug™ Bung Wrench is a new design with many surfaces and shapes to fit virtually all drum plugs. Works with steel, fiber or plastic drums. Solid ductile iron one piece construction for durability. Generous size for extra leverage and hand clearance. Use for drums of non-flammable materials. Individually packed in sturdy shipping cartons showing instructions for use. MADE IN THE USA 2 Year Warranty