Morse® Drum Karrier - 21"-23" Diameter Steel Drum - 800 Lbs. Capacity Below-Hook Drum Carrier enables you to move and pour a drum within your reach. Dispense drum contents with your hoist or crane. Even lift and invert a drum with drum faucet in place. You manually control drum tilting 360° in either direction. The drum carrier requires that you manually grasp the drum to control the drum tilt. The drum carrier can be locked with drum in vertical position for transporting, or locked in the horizontal position to pour. Release tilt-locks on drum carrier for hand-controlled tilt at any ...

Morse® PailPRO™ 1 To 5 Gallon Can Tumbler for 1 Can - 3-Phase 230/460V Motor - Capacity: 100 Lbs. Morse® PailPRO™ Can Tumbler provides aggressive corner-over-corner mixing action. Mix products inside your sealed cans or pails with this can rotator to reduce hazards and save clean-up. Use your pail and can mixer to blend the contents of closed 1 to 5 gallon (4 to 19 liter) pails or cans. Morse 5 Gallon Can Tumbler mixes or agitates small batches quickly and economically Re-homogenize settled ingredients Use as pail or bucket mixer to blend liquids or dry materials Tumble pails ...

Morse® Hand Drum Pump General Guide: Methyl Alcohol or Ethyl Alcohol up to 2000 SSU Viscosity Morse manual drum and barrel pumps provide a controlled discharge rate of approximately 1 quart (.95 liter) on complete forward and backward cycle at 10 psi over 24 feet (7.3 m). They fit the NPT (National Pipe Thread) of the 2" (5 cm) bung on 55 or 30 gallon (208 or 114 liter) steel drum. Adaptors are also available to use Morse 55-gallon (208 liter) barrel pumps with the buttress thread of the 2" (5 cm) bung on your plastic barrels. Suction lift tested for 15 feet (4.6 m) minimum Discharge head ...

Morse® Below-Hook Drum Lifter - No Tilt - For 22"-23.5" Diameter Steel, Fiber or Poly Drums - 1000 Lb. Capacity Attach to your hoist or crane to transport an upright drum. The drum is secured by a ratchet and pawl mechanism and supported by a bar at the bottom. This ensures that your plastic, fiber or steel drum will be transported safely with no chance of sliding out. No tools are necessary. Once loaded, the unit carries the drum without tilting it. Handles steel, plastic or fiber drum with 22" to 23.5" (55.9 cm to 59.7 cm) diameter and 23" to 38" (58.4 cm to 96.5 cm) tall. Also accepts ...

Morse® MORplug™ Ductile Iron Drum Wrench MORplug™ Bung Wrench is a new design with many surfaces and shapes to fit virtually all drum plugs. Works with steel, fiber or plastic drums. Solid ductile iron one piece construction for durability. Generous size for extra leverage and hand clearance. Use for drums of non-flammable materials. Individually packed in sturdy shipping cartons showing instructions for use. MADE IN THE USA 2 Year Warranty