Sealer Sales® Replacement Kit For FRM-1010

Replacement Kit Includes: (2) 2. 7mm or 10mm wide heating element (2) 1/2" PTFE adhesive 1ft. long roll of PTFE cover This replacement kit is compatible with the following models: WN-1000H We recommend replacing the bottom PTFE adhesive strip (1/2" wide sticky backed-remove the liner) every time the element is replaced. Place the PTFE adhesive strip under the element on the base of sealer.

Replacement Kit Includes: (2) 5mm wide heating element (2) 1/2" PTFE adhesive 1ft. long roll of PTFE cover This replacement kit is compatible with the following models: KS-FS605 We recommend replacing the bottom PTFE adhesive strip (1/2" wide sticky backed-remove the liner) every time the element is replaced. Place the PTFE adhesive strip under the element on the base of sealer.

Replacement Kit Includes: (2) 2. 8mm wide heating element (2) 1/2" PTFE adhesive (2) 2" PTFE cover (1) blade This replacement kit is compatible with the following models: FS-1000H We recommend replacing the bottom PTFE adhesive strip (1/2" wide sticky backed-remove the liner) every time the element is replaced. Place the PTFE adhesive strip under the element on the base of sealer.

Replacement Kit Includes: (2) 5 mm wide heating element (2) 1/2" 6mil PTFE adhesive (2) 12" 5mil PTFE cover roll This replacement kit is compatible with the following models: W-450T We recommend replacing the bottom PTFE adhesive strip (1/2" wide sticky backed-remove the liner) every time the element is replaced. Place the PTFE adhesive strip under the element on the base of sealer. Note: sealers with 2. 7 mm heating elements cannot be interchanged with 5mm heating elements and vice versa.

Replacement Kit Includes: (2) 10mm wide heating element (2) 1/2" PTFE adhesive 1ft. long roll of PTFE cover This replacement kit is compatible with the following models: W-3010A Note: Image shows 5mm wide element but element is 10mm wide