Gas Detectors

The Triplett Model GSM200 Desktop Indoor Air Quality CO2 Monitor simultaneously displays CO2, Temperature, Relative Humidity, Time and Date and can be used to measure air quality in office buildings, schools, exhibition halls, shopping malls, meeting rooms, fitness centers, restaurants and other public places. It has 3 status indicators (Good/Normal/Poor) that change with CO2 concentration and user programmable audible/visual CO2 alarms (Good (default 800ppm), Poor (default 1200ppm)) with disable to alert you when safe CO2 levels have been exceeded. The sensor incorporates NDIR ...

Altair® 2X Gas Detectors incorporate proven XCell7#174; sensor technology. Enhance worker safety, compliance and traceability. Minimize cost of ownership. Demonstrate rugged durability. Features First stand-alone bump test, which eliminates the need for bottled gas! Bump test anytime, anywhere Based on proven science and patented sensor capabilities Fastest sensor response times, lowest calibration gas flow rate on the market 4-year expected sensor life 3-year warranty on instrument & most sensors (2 years on Cl2, NH3) Bump pass: green LED flash every 15s, large on-screen checkmark Bump ...

The Altair® 5X Gas Detector is capable of measuring up to 6 gases simultaneously and is now available with integrated PID sensor for VOC detection. Driven by advanced MSA XCell® Sensor Technology, the Altair® 5X Gas Detector delivers faster response time, better stability, accuracy, longer service life, and cost savings over the life of the instrument. Features Rugged overmolded polycarbonate housing provides unsurpassed durability, including ability to survive 10-ft. (3m) drop; IP65-certified. Field-proven integral pump provides consistent gas flow, eliminating concerns of ...

Features: Detects a wide range of combustible gases including: gasoline, propane, natural gas, fuel oil, methane, benzene, ethane, butane, acetone, alcohol, ammonia, industrial solvents, lacquer, paint thinner and naphtha High sensitivity detects small leaks Designed for one-handed operation 16" (406mm) gooseneck for hard to reach areas User adjustable sensitivity wheel Alarm set at 10% LEL for methane Earphone jack for loud environments (earphones sold separately) Tricolor visual indicator Audible (variable tick rate) and visual (LED) alarm indicators User replaceable sensor

This carbon monoxide meter is capable of detecting concentrations up to 1000ppm. The R9400 features a backlit LCD display with data hold/max functions and user adjustable alarm limit. Features: Backlit 4-digit, dual LCD displays CO levels from 0 to 1000ppm and ambient temperature User adjustable alarm limit (audible beep frequency increases as CO level rises) Quick response and high accuracy Data hold and max functions Self test sequence on start-up Low battery indicator and auto shut off Warm-up Time: 60 seconds Response Time: 2x per sec. Auto Shut-off: Yes (after 30 mins, off) Power ...