Sealer Sales W Series 12" Direct Heat Foot Sealer, Meshed Seal, 15mm Seal Width

Our AVP Series Heat Sealers were designed for heavy duty applications. The most evident feature of the AVP units are the lack of visible controls. Form follows function providing an expansive work surface to hold product ready to be sealed. External compressor required (6CFM@100PSI) Side mounted heat and cool timers fitted to a powder coated steel chassis regulate seal parameters that are critical to obtaining airtight and watertight seals. A one-tap steel encased footswitch provides hands free operation. Like the AVN, AVS and CAV units, the AVP units will not fire an impulse until ...

The heat sealer is ideal for sealing small, irregular or extra long packages. Constructed with a high impact ABS thermal casting for heavy applications. A 5-15 min warm-up time is needed. Easy to Operate: Depending on the material, allow 5-15 min of warm-up time for the sealer to reach the desired temperature. Just insert the material between the jaws and close the jaws for a few seconds. Release the jaw, and increase or decrease the timing until a satisfactory seal is obtained.

W-300DAT is a table-top, auto, and direct heat sealer. It is equipped with an electronic timer to control the sealing time. Once the correct setting has been established, consistent seals will be maintained automatically. This 12" sealer comes in ivory with 15mm wide serrated jaws and a foot switch for a semi-automatic setting. The hot sealing bars are enclosed with a heat resistant plastic bar for safer operation. Auto and foot-operated direct heat sealers seal all types of thermoplastic packaging material, but especially ideal for thicker material such as coated aluminum foil, kraft ...

Our KF-Series foot sealers are ideal for high volume poly bag and other thermoplastic sealing. The sealers are capable of sealing 15-20 bags per minute. These sealers allow you to keep both hands free for quicker and more accurate sealing. The machines are also equipped with a plug-in timer. The timer controls the sealing time needed for different materials. Once the timer is set, it will give a consistently flat seal. When the seal is done, the signal light on the timer will turn off. The sealers include a 26" pedestal, a 2" base, an adjustable worktable and an adjustable foot control. ...

The KF-200CS is portable direct heat sealer that is lightweight and easy to use anywhere. KF-sealers are ideal for sealing small, irregular, or extra long packages. It is recommended to use this sealer if you are sealing cellophane, coated aluminum foil, kraft paper and other thicker materials. Equipped with an adjustable temperature controller allows the user to control the amount of heat needed for different material types. A 5-15 min warm-up time is required to achieve the correct temperature. The sealer is constructed of durable metal with insulated rubber handgrips. Also included ...