JET® Serrated Jaw Inserts Ser 600, JT9-2903280

For Use With: Jet 78C Continuous Rapid Acting Vise 79C Continuous Rapid Acting Vise

For Use With: Jet 204-1/2M3 Combination Pipe and Bench Vise 204-1/2M2 Combination Pipe and Bench Vise 504-12M3 Machinist Vise 504M3 Machinist Vise 604-12M3 Machinist Vise 604M3 Machinist Vise

Ring inner diameter is approx. 2"rnrnOuter ring diameter is approx. 3"rnrnThe washer inner diameter is approx 1-3/4"rnrnOuter Diameter is approx. 1-15/16"rnrnScrew holes are approx 3/16" For Use With: Jet C-2 (Before 1998) Combination Pipe and Bench Vise C-3 (Before 1984) Combination Pipe and Bench Vise C-3 (After 1984) Combination Pipe and Bench Vise C-2 (After 1998) Combination Pipe and Bench Vise C-3 (After 1998) Combination Pipe and Bench Vise 600 (After 1998) Machinist Vise 600 (Before 1998 ) Machinist Vise

This is a genuine Jet and Wilton replacement part for use in utility vises. The spindle nut attaches to the spindle and is made out of metal. It may require a set of pliers during installation and will need to be replaced if it breaks. This is available as an individual replacement part. For Use With: Jet 648B HD (Before 2000) Utility Vise 648A HD (After 2000) Utility Vise

This is an original part from Wilton. The lock nut and bolt assembly is compatible with many vises, and is sold individually. The assembly includes two bolts and two lock nuts used to secure the inner ring and the outer ring of the vise. No additional tools should be required for the installation. For Use With: Jet C-1 (Before 1998 Old) Combination Pipe and Bench Vise C-1 (Before 1998 New) Combination Pipe and Bench Vise C-1 (After 1998) Combination Pipe and Bench Vise 350 (After 1998) Machinist Vise 400 (After 1998) Machinist Vise 450 (After 1998) Machinist Vise 500 (After 1998) ...