JET® Shaft Housing Ghb-1340, CM9-4111

JET offers woodworkers advanced sharpening features like torque adjustment for consistent pressure to the drive shaft, variable dial speed control that maintains outer wheel speed regardless of sharpening wheel diamter, and an oversized resevoir for better water management. The Jet Variable Speed Wet Sharpener provides a storage drawer for additional Included with the Variable Speed Wet Sharpener is a 220 grit 10 inch aluminum oxide grinding wheel, leather strop wheel, support arm, stone grader, straight edge jig, leather honing compound, angle measuring device and chisel angle jig. ...

This is a genuine Jet replacement part. The inlet port is designed by the manufacturer for use in dust collectors. This part is made of high-quality plastic, and is attached to the impeller housing. You may require a screwdriver when replacing this item. This part is sold individually. For Use With: Jet DC-1100A (708639) Dust Collector DC-1100RC (708626RC) Dust Collector DC-1200A (708634) Dust Collector With Filter Bag DC-1200CRC (708635RC) Dust Collector With Canister DC-1200A (708635) Dust Collector With Filter Bag DC-1200C (708634C) Dust Collector With Canister DC-1100BK Dust Collector ...

This item is made of metal and is sold individually. The retainer strap goes between the impeller housing and the filter. It may require a wrench and a set of pliers during the installation. It will require replacing if it becomes broken. This is a genuine Jet replacement part for use in dust collections. For Use With: Jet DC-650A (708640) Dust Collection DC-650C (708640C) Dust Collection DC-650ARC (708640RC) Dust Collection DC-650CRC (708641RC) Dust Collection DC-650BK (708642) Dust Collector DC-650CK (708642) Dust Collector DC-650MK (708642) Dust Collector

This return spring is sold individually and fits between the quill pinion spring cover and the spring housing. It is made out of metal and will need to be replaced if it becomes broken or bent. A screwdriver may be necessary during the installation of this spring. This is an OEM Powermatic part directly sourced from the manufacturer to be used in drill presses. For Use With: Jet 1150 15" Drill Press 1150 15" Drill Press 1200 20Inch. Drill Press 1200 20Inch. Drill Press 1200HD 20Inch. Drill Press 1200HD 20Inch. Drill Press 1150A 15In. Drill Press 1150A 15In. Drill Press 1150HD 15In. Drill ...

This is an authentic replacement part that is sourced from the original manufacturer for use with planers. The oil seal is commonly used to fill the space between the gear shaft and the gear box housing. This replacement part is available individually, please note two may be required. For Use With: Jet 209-1 (1791296) 5HP-1Ph 230V Planer 209HH-3 (1791316) 5HP-3Ph 230V/460V Planer 209-3 (1791297) 5HP-3Ph 230V/460V Planer 209HH-1 (1791315) 5HP-1Ph 230V Planer