L.H.Dottie® Triple Grip Anchor Kit w/ Combo Hex Head Screw, #12, 101 Pieces

The WDK6T contains #6 Zinc Alloy Anchors and #6 Phillips/Slotted i.e. Combo Drive Sheet Metal Screws. The Wall Board Anchor is manufactured with a fine centered point that helps guide the anchor into the material. It features a unique sharp thread design that allows it to screw directly into drywall with no pre-drilling. It is also a reusable anchor that can be easily installed with a screwdriver or power driven screwdriver. It features Superior Pullout and Shear, Self Drilling, No Drill Bit Needed, Sharp Profile Thread Cuts Deep. Material is Zamac Alloy.

The K14CHX Kit is suitable for use in solid and hollow wall, concrete, block, or brick applications. When used in hollow walls, such as drywall or plywood, the red green wings will splay out to provide a more secure installation and higher pull-out load. The anchor has a lip to prevent falling into deep holes or hollow walls. For hard wall applications, use the size of the anchor to determine hole size for installation. For drywall or soft applications it is recommended to use the smallest hole that will enable a tight fit of the anchor. These anchors are not recommended for use in ...

This reusable A420000 anchor point is easily installed through holes in metal structures, and is designed to be used vertically. Simply squeeze to twist lock, and release to activate.

Dewalt eng. by Powers PFM1411480 - Screw-Bolt™, Carbon Steel, 1/2" x 6" - 25 Pk Heavy duty anchor with a finished hex head. It is easy to identify, removable and vibration-resistant.

Guardian Fall Protection Bull Ring Anchors is perfectly suited for personal fall arrest, restraint, or work positioning applications. For all applications, the worker weight capacity range (including all clothing, tools, and equipment) is 130 to 420 pounds. Substrate must be roof truss or support beam that is minimum of 3" thick CDX or better. All fasteners (use either six 16d, 3" long 8 gauge nails or three 1/4" x 3" zinc-plated steel hex head lag screws) must be fully embedded in the substrate. Features: Easy to install Reusable Lightweight and durable Compatible with horizontal lifelines