Heater Accessories

This regulator is For use with all Ceramic Heaters between 1/2 and 2 psig. The maximum supply pressure to the infrared heaters is 14 " WC or 1/2 psig. If your supply pressure is between 1/2 psig and 2 psig then you will need this second stage regulator. The regulator is equipped with vent limiting device and complies with ANSI standards. The regulator does not need any venting. This product has limited warranty of 1 year. This product is made in USA.

Features: Actuator-activated safety switches IP69 rated Left hand orientation standard with right hand reconfigurable The safety switch point is adjustable from 0° to 270° Supports a load of 1800 N (180 kg) Stainless Steel Life: 1 million operations Contact function: 2 NC, 1 NO

This corner reflector is for use with all straight and U-Tube heaters. The corner reflector is only used when 90 degree elbows are used. Can only be used for horizontal mounting. Helps to minimize convection losses and reduce the clearance to combustibles above the heater. The clearance to combustibles above can decrease from 18" to 6" when corner reflectors are used. This product has a limited warranty of 1 Year. This product is made in USA.

This optional End Reflector Kit is for use with all Infrared tube heaters. Helps to minimize convection losses and increase tube temperatures. Recommended for use when the heaters are angle mounted or when overall system efficiency improvements are needed. This product has a limited warranty of 1 Year. This product is made in USA.

Long-Reach Cable Puller - 1500 Lb. Capacity This Long-Reach Cable Puller is ideal for applications that require pulling over long distances. Pull up to 60 feet without unhooking and resetting as required when using conventional lever or hand chain hoists. Works great for pulling horizontally. Not for use in vertical lifting applications. 1,500 lb capacity.