Fan Controls

Features The Remote Indoor Temperature Sensor is used to sense temperature remotely Used to sense temperature if the thermostat is installed in a poor temperature sensing location Small remote temperature sensor to match any room decor Easy to install and use Factory calibrated; no field calibration required Works with a maximum 200 foot wire run

The TA155 manual changeover thermostat is designed for use in HVAC systems including two-pipe fan coil applications or other installations requiring manual switching between heating and cooling. Solid state accuracy offers comfort and efficiency while contemporary styling complements room decor. Advanced self-configuring circuitry allows the T155 electronic thermostat to be applied directly to input voltages from 24 to 277 VAC , 50 or 60Hz. T h e r m o s t at outputs are suitable for connection to relays, valves and similar pilot duty loads. The system and fan switches will handle ...

Honeywell Mechanical Temperature Controller T6031A1029 Remote Bulb -30 to 90°F, Refrigeration, Heat & Cool Features: For modulating control of water or air temperature in ducts, tanks and similar applications Fast response models (for duct mounting) have coiled sensing element giving at least four times faster response than standard models Ambient temperature compensated for the case and tubing Sensing element capillary tubing allows remote mounting of sensing element Setpoint may be read and adjusted through cover Throttling dial inside case adjusts proportional throttling range ...

Features Thermocouples generate a thermoelectric current that senses a pilot flame on gas-fired heating systems. The pilot flame heats the tip of the thermocouple, producing a temperature differential between it and the base. This temperature difference generates a small amount of DC power, measured in millivolts Push-in clip, split nut, and adapter assembly for easy pilot burner installation Spade or quick-connect terminals available for millivolt gas control connections Male nut connector for Pilotstat® safety control power units Available in a variety of lead lengths

Honeywell PRO 1000 Non-Programmable Vertical Thermostat TH1210DV1007 - 2H / 1C Heat Pump Your new Honeywell thermostat has been designed to give you many years of reliable service and easy-to-use, push-button climate control. Features: Backlit display is easy to read Displays ambient (measured) temperature at all times One-touch access to set point temperature Built-in compressor protection