Fan Controls

Features The Remote Indoor Temperature Sensor is used to sense temperature remotely Used to sense temperature if the thermostat is installed in a poor temperature sensing location Small remote temperature sensor to match any room decor Easy to install and use Factory calibrated; no field calibration required Works with a maximum 200 foot wire run

The TA155 manual changeover thermostat is designed for use in HVAC systems including two-pipe fan coil applications or other installations requiring manual switching between heating and cooling. Solid state accuracy offers comfort and efficiency while contemporary styling complements room decor. Advanced self-configuring circuitry allows the T155 electronic thermostat to be applied directly to input voltages from 24 to 277 VAC , 50 or 60Hz. T h e r m o s t at outputs are suitable for connection to relays, valves and similar pilot duty loads. The system and fan switches will handle ...

The A421 Series controls are single stage, line-voltage electronic temperature controls with a single-pole, double-throw (SPDT) output relay. These can be used to control a wide variety of single-stage refrigeration or HVAC equipment with an ambient temperature range of -40 to 212°F. Model A421ABC-02C features standard Type 1 (NEMA) IP20 high-impact plastic enclosure suitable for surface or DIN rail mounting and rated for either 120 or 240 VAC. Includes A99BB-200C PTC temperature sensor with a 2 in. standard probe and 6.6 ft. PVC cable. Features: Control Front Panel LCD Basic and ...

Features: High pressure limit switches Stainless steel diaphragm for use with steam, air, noncombustible gases and fluids non-corrosive to stainless steel L4079W is for Oil Applications Micro SwitchÔ snap-acting switches open automatically on pressure rise; must be manually reset Mount using 1/4" NPT female fitting on diaphragm assembly or surface mount through back of case Switching Action : SPST break on pressure rise

Fantech Electronic Timer RTS5 - 20/40/60 The RTS5 is compatible with Fantech Flex 100H, VHR70R,VHR100R, VHR150 and VHR150R. The push button activates the system to run in continuous mode for 20, 40 or 60 minutes, it then returns to the predetermined setting. To cancel this operation, simply press the button a fourth time.