Anchorage Connectors

The Werner® A410400 is a simple, portable, and personal fall arrest anchorage connector that fits 1-5/8 inch wide struts. The anchor is lightweight, simple to use, and quick to install. This anchor enables horizontal movement along the material of the strut channel. Features: Compatible with standard 1-5/8 inch, 12 gauge or thicker, strut channel Durable zinc-coated steel construction Minimum Breaking Strength (MBS): 5,000 lb Meets ANSI Z359.18-2017, Type A and OSHA 1910.140 and 1926.502 standards

The Werner A311000 EVO Anchor is a 5K removable anchor that utilizes the Remote Grab System (RGS). The RGS allows the user to install the EVO Anchor before leaving the safety of the ground. The RGS can also be used to remove the anchor from the ground after the job is done. The EVO Anchor requires a pre-installed receptacle that is cast-in-place during construction of the surface. Features: Removable 5K anchor Can be installed from the ground with the Remote Grab System (RGS) Breaking Strength: 5,000 lb. 2 inch steel swivel D-ring Concrete applications Precast anchor receptacles for wood ...

The Werner® A525400 Post Anchor features fastening holes and is made of corrosion-resistant galvanized steel construction. The 16-inch x 16-inch x 3/8-inch base plate provides secure and permanent installation for wood and concrete applications. Features: Corrosion-resistant galvanized steel construction Fastening holes for wood, concrete, or I-beam installation Minimum Breaking Strength (MBS): 5,000 lb Fastens to I-beams with backer plate model A525405 (sold separately) 360-degree loading direction Meets ANSI Z359.18-2017 and OSHA 1910.140 and 1926.502 requirements

The Werner A510022 10K Mega-Swivel with Straight Loop Insert Bolt attaches to the Werner A510021 Straight Loop Insert that was cast-in place during construction of the surface. The Mega-Swivel is made of steel and plated for corrosion resistance. Includes 5/8 inch bolt and lock washer. The Mega-Swivel design allows full range of motion. Features: Robust steel design with 360 degree swivel of the forged D-ring Includes 5/8 inch x 3-1/2 inch bolt, internal tooth lock washer Breaking Strength: 10,000 lb. Meets ANSI and OSHA Standards 360 degree swivel Zinc plated steel, 3 1/2 inch long, 5/8 ...

The Werner A510010XG Reusable Concrete Anchor is a lightweight, easy to use bolt providing convenient anchorage in concrete. The anchor requires a pre-drilled hole of 1 inch and 4-1/2 inch deep in 3000 psi concrete. It can be used in any direction as a fall protection anchor and is reusable with its easy to insert and remove design. The attachment point is green. Features: Lightweight design is easy to insert and remove Drill hole of 1 inch with 4-1/2 inch minimum depth Minimum 3000 psi concrete Multi-directional use Minimum Breaking Strength(MBS): 5,000 pounds Meets ANSI and OSHA standards