3M™ Safety-Walk™ Slip-Resistant General Purpose Tapes/Treads 630-B, 2 in x 60 ft

NSTS standard 60 Grit anti slip tape is made from a fine grade aluminum oxide, which makes it suitable for use in a wide range of appli­cations. The grit is a medium Anti-Slip abrasive coating.­ Our standard Safety-Grip™ is great for general Anti-Slip requirements possessing excellent levels of grip (measured as Coefficient of Friction). Safety-Grip™ is water resistant (if applied onto a non-porous surface, we do also offer a complete range of ancillaries) and has exceptional durability in external or internal areas.

General Purpose Glow-in-the-Dark Anti-Slip Tape is a certified high-traction safety solution, tested and approved by the National Floor Safety Institute (NFSI) for slip resistance. Designed to enhance visibility and safety in low-light or emergency situations, this tape features a durable, textured surface that provides reliable grip-even in wet or hazardous conditions. The photoluminescent tape absorbs ambient light and glows in the dark, clearly marking stairs, ramps, walkways, and other potentially dangerous areas. Ideal for indoor and light-duty outdoor use, it glows for several hours ...

3M™ Controltac™ Film Technology has posts that allow the traction material to be repositioned on the surface before final adhesion, saving time and virtually eliminating rework. 3M™ Comply™ Adhesive Technology provides air release channels in the liner providing a bubble free application to help ensure a smooth adhesion to the surface. The channel pattern is replicated onto the Safety-Walk™ adhesive and allows air to be released to the edge of the traction material when pressure is applied. This mineral coated, slip resistant material features a highly durable ...

Heskins conformable 36 Grit traction tape is perfect for applying onto an irregular surface such as diamond plate. If you have an irregular surface, you need a product that can cope with the intricacies of this demanding application. Diamond plate can be a very dangerous surface; it is potentially lethal when wet, creating a greater risk of slips. The levels of grip can also be very low; this is measured in Coefficient of Friction or (COF). Applying conventional tape does not work successfully, since the peaks and valleys result in stretching of the plastic film. Thus when applied into ...

Provide Traction Over Rollers Constructed from a tan glass cloth reinforced backing and coated with a pressure-sensitive silicone adhesive, our 3M™ Traction Tape 5401 (PDF, 38 Kb) is an ideal choice for traction applications common in printing processes, such as flexo-printing. This tape helps provide traction for material passing over rollers, while also providing a non-stick surface. The long-lasting, silicone adhesive adheres well to most surfaces and removes cleanly with minimal clean-up. 3M™ Traction Tape 5401 performs in temperatures up to 300°F, allowing it to be ...