Durham Mfg® 4 Sided Box Truck, Steel, 2000 lb. Capacity, 42-1/4"L x 24-1/4"W x 34-5/8"H

30" x 36"-Durham Manufacturing Low Deck Service Truck, 2000 LB Capacity, 14 gauge Steel with 8" Phenolic Casters and Floor Break Low-Deck Trucks Raised handle make it easy to push these low rise trucks through crowded aisles. Ideal for picking items from lower shelves. 1-1/2" x 1/8" angle iron construction. Offset handle provides room for fingers when even when fully loaded. Top shelf is 31" above floor. 14-gauge steel shelves. Floor break. 8" x 2" phenolic bolt-on casters, (2) Swivel and (2) Rigid support 2,000 lbs. All units come fully welded and ready for use. Gray powder coated finish ...

3-Wheel Dual Tapered Tilt Truck rolls on two axle-mounted wheels with ball bearings and one rear swivel caster with roller bearings. Truck is constructed of 14-ga. steel with leak-proof solid welds on the seams. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading. Hemmed lip around the top edge of the truck provides reinforcement with bulky loads, and steel handles aid in maneuvering trucks. Rolls on molded-on rubber wheels.

Features: Low Deck 6" x 2" Phenolic Casters - (4) Swivel 9" on Either Side of "A" with 1-1/2" Lips Up and Angle Iron Frame lip on deck prevents parts from falling off during transport Deck is 9-1/8" above the floor Heavy duty handle makes transport easy The Durable Baked On Powder Coat Finish Holds Up in Harsh Industrial Environments

4-Wheel Dual Tapered Tilt Truck is constructed of 14-ga. steel with leak-proof solid welds on the seams for long-lasting, dependable service. The running gear consists of two fixed casters reinforced by steel tubing, and two swivel steering casters. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading. Hemmed lip around the top edge of the truck provides reinforcement with bulky loads, and steel handles aid in maneuvering trucks. Rolls on molded-on wheels.

Designed to fit under Punch Presses, Conveyors and similar Machinery. Designed for containment of scrap metal shavings and chips, this hopper has a low tapered side that allows easy unloading of excess waste. Low-profile hopper truck is made with welded 12 gauge steel for strength. Low-profile tilt truck features a 1" diameter push handle and roll smooth on 5" phenolic casters (2 swivel, 2 rigid). Durable gray enamel finish. Shipped assembled. Made in USA.