Kee Safety - L46-6 - Aluminum Combination Socket Tee Crossover, 1" Dia.

Kee Klamp® Fittings Tee & Crossover Used on racking to join horizontal carrying rails to the upright, leaving the socket to take a horizontal tie across the section. For shelved racking it is usual to have the horizontal pipe outside the upright. On pallet racking it is preferable to have the carrying rails inside the upright.

Kee Klamp® Fittings Male Double Swivel Socket Member One half of a combination fitting. This can also be used for attaching flat panels to tubular structures. 3/8" diameter rivet hole.

The Extruded Aluminum Hose and Cable Crossover is designed to protect air lines, electrical cords and computer cables from damage by fork trucks, carts, and personnel. This ramp has serrated edges for maximum traction and are lightweight for easy portability.

Kee Klamp® Fittings Double Swivel Socket Complete combination fitting. Type C51 is made by combining two Type F50 fittings and one Type M51.

Kee Klamp® Fittings Crossover Coupling This fitting is designed to give a 90 degree offset crossover. As there are two socket set screws in the sleeve, this Kee Klamp fitting can be used where a join is required in the horizontal pipe. For economy, it is possible to use a Type 45 in place of the 145, using the 145 only where a join in the pipe occurs. When calculating the cutting lengths for pipe, dimension 'G' should be added to give the pipe length for the upright.