Closet Door Hardware

Features Two ball bearings Non-rising removable pin with button tip and plug 5 x 5 (127 mm x 127 mm) and 4-1/2 x 4-1/2 (114 mm x 114 mm) BB1279 available with two different leaf sizes 3-1/2 x 3-1/2 (89 x 89 mm) BB1279 available with reversible hole pattern For use on medium weight doors or doors requiring medium frequency service

Features: Full Mortise Five Knuckle Ball Bearing Standard Weight Hinge Steel with steel pin (ANSI A8112) Non-rising removable pin with button tip Two ball bearings 5" x 5" and 4.5" x 4.5" BB1279 available with two different leaf sizes 3.5" x 3.5" BB1279 available with reversible hole pattern For use on medium weight doors or doors requiring medium frequency service

The MacPro line by McKinney offers contractor grade hinges to get the job done right. High quality MacPro hinges are an extraordinary value, ideal when you need large quantities of standard hinges.

Hager Full Mortise, Five Knuckle, Ball Bearing Hinge BB1191 4.5" x 4.5" US26D Features: Full Mortise Five Knuckle Ball Bearing Standard Weight Hinge Brass with stainless steel pin (ANSI A2112) or stainless steel with stainless steel pin (ANSI A5112) Two ball bearings Non-rising removable pin with button tip and plug For use on medium weight doors or doors requiring medium frequency service

This unique product is the most versatile locking unit available. It will accommodate 7 different hole spacing patterns from 3" to 6-7/8". The 3-15/16" hole spacing is designed for use with mortise lock installations using Adam Rite and W and F mortise locks. These holes are offset 1/8" from that of the locking cylinder hole. The spacing allows locking unit to adapt to a variety of handle sets.