Extech EC-84-P 84µS Conductivity Standard

Extech 445815 Hygro-Thermometer with Dew Point In summertime, identifies and warns when conditions for mold growth exist. In wintertime, identifies and warns when low humidity conditions for static electricity exist. Remote probe allows for measurements behind walls or in difficult to access locations. Air temperature and dew point temperature indicate where condensation may occur. Monitor conditions in laboratories, storage areas and other controlled environment settings. Ideal solution when traceable ISO calibrations are required by operating standards.

Amprobe TIC 300PRO High Energy Tic Tracer û Non Contact AC High Voltage Detector Rugged and reliable for utility, industrial and mine safety applications, The Amprobe TIC 300 PRO High Energy Tic Tracer Non Contact AC Voltage Detector warns against dangerous voltages in low and medium voltage applications up to 122 KV without contactin

Megger DLRO200-EN High Current Digital Low Resistance Ohmmeter (English QWERTY keyboard) Includes: 5 m (16.4 ft.) Lead set set comprising 2 x 50 mm2 current leads with clips and 2 potential leads with clips. Download Manager. User Guide on CD-ROM. RS232 download cable.

BK Precision M402 Dipole Antenna (1.25 GHz to 1.65 GHz) for Models 2650A/2652A/2658A A BK Precision M400 Series dipole antennas (options M401 M406) connected to the RF input enables the measurement of electric field strength. Users can choose from 6 antennas based on the frequency range under investigation. Each antenna's resonance point is optimized for the frequency spectrum of a specific wireless standard. The BK Precision M406 is suitable for 5 GHz WLAN measurements.

Tektronix CT2 High-frequency Current Probe, 200 MHz 36A, Includes: Manual, P6041 Interconnect Cable The Tektronix CT2 High Frequency Current Probe is designed for permanent or semi-permanent in-circuit installation. The Tektronix CT2 probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole through which a current carrying conductor is passed during circuit assembly. The P6041 Probe Cable provides the connection between the Tektronix CT2 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate ...